Cart:

0 item(s) - $0.00
You have no items in your shopping cart.

SHIPPING TIMES ARE 1-2 DAYS TO PROCESS

805-981-4734 M-F 9-3 PST   CS@KAKINDUSTRY.COM

700

26 Item(s)

Grid  List 

Set Ascending Direction
  1. KAK REM 700 18 INCH 308 WIN KAK HEAVY PROFILE KAK REM 700 18 INCH 308 WIN KAK HEAVY PROFILE

    KAK REM 700 18 INCH 308 WIN KAK HEAVY PROFILE

    KAK INDUSTRY 308 WIN BARREL FOR REMINGTON 700

    USES THE SAVAGE "STYLE" BARREL NUT SYSTEM

    INCLUDES BARREL AND LOCK NUT

     57.6 OZ

    18.0 INCH KAK HEAVY CONTOUR (INTENDED FOR CHASSIS GUNS)

    308 WIN CHAMBER

    1:10 TWIST

    416 STAINLESS

    MUZZLE THREADED 5/8-24

    MATTE BLASTED BLACK FINISH

    GRADUATED MARKS ON THE BARREL SHANK ALLOW FOR PRECISE HEADSPACE ADJUSTMENTS IN .0017 INCREMENTS

    KAK INDUSTRY PROUDLY USES GREEN MOUNTAIN RIFLE BARREL BLANKS

    SOME INLETTING MAY BE REQUIRED AROUND THE BARREL NUT AND CONTOUR DEPENDING ON YOUR STOCK

     

    PLEASE CONSULT A QUALIFIED GUNSMITH WHEN INSTALLING

     

    THESE BARRELS ARE FOR REMINGTON BOLT ACTIONS (MDL700, MDL7, ETC) HOWEVER THEY USE A SAVAGE "STYLE" BARREL NUT SYSTEM FOR EASE OF INSTALLATION.  

    THE BARREL AND LOCK NUT ARE INCLUDED IN THE PACKAGE

     

    INSTALL INSTRUCTIONS

    MAKE SURE ALL MATING SURFACES ARE CLEAN ON ACTION FACE, RECOIL LUG, AND LOCK NUT

    LIGHTLY GREASE ALL MATING SURFACES

    REMOVE EJECTOR FROM BOLT FACE

    INSTALL BOLT INTO ACTION

    INSTALL GO GAUGE OR KNOWN GOOD CARTRIDGE IN BOLT FACE

    REMOVE THE LOCK NUT FROM THE BARREL AND APPLY A SMALL DROP OF BLUE NON PERMANENT LOC-TITE TO THREADS

    HAND TIGHTEN LOCK NUT ONTO BARREL TILL IT STOPS AND SLIDE RECOIL LUG ONTO BARREL

    TIGHTEN BARREL INTO ACTION GUIDING THE HEADSPACE GAUGE INTO THE CHAMBER

    WHEN THE BARREL IS SCREWED IN TILL THE POINT THAT IT IS HITTING ON THE GAGE - THIS IS MINIMUM HEADSPACE

    THE GRADUATED MARKS ON THE BARREL SHANK REPRESENT .0017 OF HEADSPACE ADJUSTMENT PER LINE

    BACK THE BARREL OFF APPROX ONE GRADUATED LINE TO GIVE PROPER CLEARANCE FOR HEADSPACE

    MORE OR LESS HEADSPACE ADJUSTMENT MAY BE REQUIRED DEPENDING ON YOUR APPLICATION

    TIGHTEN DOWN LOCK NUT WITH A FACTORY SAVAGE BARREL NUT WRENCH MAKING SURE THAT RECOIL LUG IS ALIGNED PROPERLY WITH AN ALIGNMENT TOOL OR SIMILAR

    THE NUT SHOULD BE TORQUED TO A MINIMUM OF 50 FOOT POUNDS

    TEST THE FIT OF BOTH GO AND NO-GAGES IN THE CHAMBER TO ASSURE PROPER HEADSPACE HAS BEEN SET

    Learn More
    $200.00
  2. KAK REM 700 18 INCH 308 WIN MAGNUM PROFILE KAK REM 700 18 INCH 308 WIN MAGNUM PROFILE

    KAK REM 700 18 INCH 308 WIN MAGNUM PROFILE

    KAK INDUSTRY 308 WIN BARREL FOR REMINGTON 700

    USES THE SAVAGE "STYLE" BARREL NUT SYSTEM

    INCLUDES BARREL AND LOCK NUT

     48.4 OZ

    18.0 INCH FACTORY MAGNUM CONTOUR

    308 WIN CHAMBER

    1:10 TWIST

    416 STAINLESS

    MUZZLE THREADED 5/8-24

    MATTE BLASTED BLACK FINISH

    GRADUATED MARKS ON THE BARREL SHANK ALLOW FOR PRECISE HEADSPACE ADJUSTMENTS IN .0017 INCREMENTS

    KAK INDUSTRY PROUDLY USES GREEN MOUNTAIN RIFLE BARREL BLANKS

    SOME INLETTING MAY BE REQUIRED AROUND THE BARREL NUT AND CONTOUR DEPENDING ON YOUR STOCK

     

    PLEASE CONSULT A QUALIFIED GUNSMITH WHEN INSTALLING

     

    THESE BARRELS ARE FOR REMINGTON BOLT ACTIONS (MDL700, MDL7, ETC) HOWEVER THEY USE A SAVAGE "STYLE" BARREL NUT SYSTEM FOR EASE OF INSTALLATION.  

    THE BARREL AND LOCK NUT ARE INCLUDED IN THE PACKAGE

     

    INSTALL INSTRUCTIONS

    MAKE SURE ALL MATING SURFACES ARE CLEAN ON ACTION FACE, RECOIL LUG, AND LOCK NUT

    LIGHTLY GREASE ALL MATING SURFACES

    REMOVE EJECTOR FROM BOLT FACE

    INSTALL BOLT INTO ACTION

    INSTALL GO GAUGE OR KNOWN GOOD CARTRIDGE IN BOLT FACE

    REMOVE THE LOCK NUT FROM THE BARREL AND APPLY A SMALL DROP OF BLUE NON PERMANENT LOC-TITE TO THREADS

    HAND TIGHTEN LOCK NUT ONTO BARREL TILL IT STOPS AND SLIDE RECOIL LUG ONTO BARREL

    TIGHTEN BARREL INTO ACTION GUIDING THE HEADSPACE GAUGE INTO THE CHAMBER

    WHEN THE BARREL IS SCREWED IN TILL THE POINT THAT IT IS HITTING ON THE GAGE - THIS IS MINIMUM HEADSPACE

    THE GRADUATED MARKS ON THE BARREL SHANK REPRESENT .0017 OF HEADSPACE ADJUSTMENT PER LINE

    BACK THE BARREL OFF APPROX ONE GRADUATED LINE TO GIVE PROPER CLEARANCE FOR HEADSPACE

    MORE OR LESS HEADSPACE ADJUSTMENT MAY BE REQUIRED DEPENDING ON YOUR APPLICATION

    TIGHTEN DOWN LOCK NUT WITH A FACTORY SAVAGE BARREL NUT WRENCH MAKING SURE THAT RECOIL LUG IS ALIGNED PROPERLY WITH AN ALIGNMENT TOOL OR SIMILAR

    THE NUT SHOULD BE TORQUED TO A MINIMUM OF 50 FOOT POUNDS

    TEST THE FIT OF BOTH GO AND NO-GAGES IN THE CHAMBER TO ASSURE PROPER HEADSPACE HAS BEEN SET

    Learn More
    $200.00
  3. KAK REM 700 16 INCH 308 WIN KAK HEAVY PROFILE KAK REM 700 16 INCH 308 WIN KAK HEAVY PROFILE

    KAK REM 700 16 INCH 308 WIN KAK HEAVY PROFILE

    KAK INDUSTRY 308 WIN BARREL FOR REMINGTON 700

    USES THE SAVAGE "STYLE" BARREL NUT SYSTEM

    INCLUDES BARREL AND LOCK NUT

     50.3 OZ

    16.0 INCH KAK HEAVY CONTOUR (INTENDED FOR CHASSIS GUNS)

    308 WIN CHAMBER

    1:10 TWIST

    416 STAINLESS

    MUZZLE THREADED 5/8-24

    MATTE BLASTED BLACK FINISH

    GRADUATED MARKS ON THE BARREL SHANK ALLOW FOR PRECISE HEADSPACE ADJUSTMENTS IN .0017 INCREMENTS

    KAK INDUSTRY PROUDLY USES GREEN MOUNTAIN RIFLE BARREL BLANKS

    SOME INLETTING MAY BE REQUIRED AROUND THE BARREL NUT AND CONTOUR DEPENDING ON YOUR STOCK

     

    PLEASE CONSULT A QUALIFIED GUNSMITH WHEN INSTALLING

     

    THESE BARRELS ARE FOR REMINGTON BOLT ACTIONS (MDL700, MDL7, ETC) HOWEVER THEY USE A SAVAGE "STYLE" BARREL NUT SYSTEM FOR EASE OF INSTALLATION.  

    THE BARREL AND LOCK NUT ARE INCLUDED IN THE PACKAGE

     

    INSTALL INSTRUCTIONS

    MAKE SURE ALL MATING SURFACES ARE CLEAN ON ACTION FACE, RECOIL LUG, AND LOCK NUT

    LIGHTLY GREASE ALL MATING SURFACES

    REMOVE EJECTOR FROM BOLT FACE

    INSTALL BOLT INTO ACTION

    INSTALL GO GAUGE OR KNOWN GOOD CARTRIDGE IN BOLT FACE

    REMOVE THE LOCK NUT FROM THE BARREL AND APPLY A SMALL DROP OF BLUE NON PERMANENT LOC-TITE TO THREADS

    HAND TIGHTEN LOCK NUT ONTO BARREL TILL IT STOPS AND SLIDE RECOIL LUG ONTO BARREL

    TIGHTEN BARREL INTO ACTION GUIDING THE HEADSPACE GAUGE INTO THE CHAMBER

    WHEN THE BARREL IS SCREWED IN TILL THE POINT THAT IT IS HITTING ON THE GAGE - THIS IS MINIMUM HEADSPACE

    THE GRADUATED MARKS ON THE BARREL SHANK REPRESENT .0017 OF HEADSPACE ADJUSTMENT PER LINE

    BACK THE BARREL OFF APPROX ONE GRADUATED LINE TO GIVE PROPER CLEARANCE FOR HEADSPACE

    MORE OR LESS HEADSPACE ADJUSTMENT MAY BE REQUIRED DEPENDING ON YOUR APPLICATION

    TIGHTEN DOWN LOCK NUT WITH A FACTORY SAVAGE BARREL NUT WRENCH MAKING SURE THAT RECOIL LUG IS ALIGNED PROPERLY WITH AN ALIGNMENT TOOL OR SIMILAR

    THE NUT SHOULD BE TORQUED TO A MINIMUM OF 50 FOOT POUNDS

    TEST THE FIT OF BOTH GO AND NO-GAGES IN THE CHAMBER TO ASSURE PROPER HEADSPACE HAS BEEN SET

    Learn More
    $200.00
  4. KAK REM 700 16 INCH 308 WIN MAGNUM PROFILE KAK REM 700 16 INCH 308 WIN MAGNUM PROFILE

    KAK REM 700 16 INCH 308 WIN MAGNUM PROFILE

    KAK INDUSTRY 308 WIN BARREL FOR REMINGTON 700

    USES THE SAVAGE "STYLE" BARREL NUT SYSTEM

    INCLUDES BARREL AND LOCK NUT

     43.4 OZ

    16.0 INCH FACTORY MAGNUM CONTOUR

    308 WIN CHAMBER

    1:10 TWIST

    416 STAINLESS

    MUZZLE THREADED 5/8-24

    MATTE BLASTED BLACK FINISH

    GRADUATED MARKS ON THE BARREL SHANK ALLOW FOR PRECISE HEADSPACE ADJUSTMENTS IN .0017 INCREMENTS

    KAK INDUSTRY PROUDLY USES GREEN MOUNTAIN RIFLE BARREL BLANKS

    SOME INLETTING MAY BE REQUIRED AROUND THE BARREL NUT AND CONTOUR DEPENDING ON YOUR STOCK

     

    PLEASE CONSULT A QUALIFIED GUNSMITH WHEN INSTALLING

     

    THESE BARRELS ARE FOR REMINGTON BOLT ACTIONS (MDL700, MDL7, ETC) HOWEVER THEY USE A SAVAGE "STYLE" BARREL NUT SYSTEM FOR EASE OF INSTALLATION.  

    THE BARREL AND LOCK NUT ARE INCLUDED IN THE PACKAGE

     

    INSTALL INSTRUCTIONS

    MAKE SURE ALL MATING SURFACES ARE CLEAN ON ACTION FACE, RECOIL LUG, AND LOCK NUT

    LIGHTLY GREASE ALL MATING SURFACES

    REMOVE EJECTOR FROM BOLT FACE

    INSTALL BOLT INTO ACTION

    INSTALL GO GAUGE OR KNOWN GOOD CARTRIDGE IN BOLT FACE

    REMOVE THE LOCK NUT FROM THE BARREL AND APPLY A SMALL DROP OF BLUE NON PERMANENT LOC-TITE TO THREADS

    HAND TIGHTEN LOCK NUT ONTO BARREL TILL IT STOPS AND SLIDE RECOIL LUG ONTO BARREL

    TIGHTEN BARREL INTO ACTION GUIDING THE HEADSPACE GAUGE INTO THE CHAMBER

    WHEN THE BARREL IS SCREWED IN TILL THE POINT THAT IT IS HITTING ON THE GAGE - THIS IS MINIMUM HEADSPACE

    THE GRADUATED MARKS ON THE BARREL SHANK REPRESENT .0017 OF HEADSPACE ADJUSTMENT PER LINE

    BACK THE BARREL OFF APPROX ONE GRADUATED LINE TO GIVE PROPER CLEARANCE FOR HEADSPACE

    MORE OR LESS HEADSPACE ADJUSTMENT MAY BE REQUIRED DEPENDING ON YOUR APPLICATION

    TIGHTEN DOWN LOCK NUT WITH A FACTORY SAVAGE BARREL NUT WRENCH MAKING SURE THAT RECOIL LUG IS ALIGNED PROPERLY WITH AN ALIGNMENT TOOL OR SIMILAR

    THE NUT SHOULD BE TORQUED TO A MINIMUM OF 50 FOOT POUNDS

    TEST THE FIT OF BOTH GO AND NO-GAGES IN THE CHAMBER TO ASSURE PROPER HEADSPACE HAS BEEN SET

    Learn More
    $200.00
  5. KAK REM 700 16 INCH 458 SOCOM HEAVY PROFILE KAK REM 700 16 INCH 458 SOCOM HEAVY PROFILE

    KAK REM 700 16 INCH 458 SOCOM HEAVY PROFILE

    KAK INDUSTRY 458 SOCOM BARREL FOR REMINGTON 700

    USES THE SAVAGE "STYLE" BARREL NUT SYSTEM

    INCLUDES BARREL AND LOCK NUT

     

    16.0 INCH HEAVY CONTOUR

    458 SOCOM CHAMBER

    1:14 TWIST

    41V50 STEEL

    MUZZLE THREADED 5/8-24

    MATTE BLASTED BLACK FINISH

    GRADUATED MARKS ON THE BARREL SHANK ALLOW FOR PRECISE HEADSPACE ADJUSTMENTS IN .0017 INCREMENTS

    KAK INDUSTRY PROUDLY USES GREEN MOUNTAIN RIFLE BARREL BLANKS

    SOME INLETTING MAY BE REQUIRED AROUND THE BARREL NUT AND CONTOUR DEPENDING ON YOUR STOCK

     

    PLEASE CONSULT A QUALIFIED GUNSMITH WHEN INSTALLING

     

    THESE BARRELS ARE FOR REMINGTON BOLT ACTIONS (MDL700, MDL7, ETC) HOWEVER THEY USE A SAVAGE "STYLE" BARREL NUT SYSTEM FOR EASE OF INSTALLATION.  

    THE BARREL AND LOCK NUT ARE INCLUDED IN THE PACKAGE

     

    INSTALL INSTRUCTIONS

    MAKE SURE ALL MATING SURFACES ARE CLEAN ON ACTION FACE, RECOIL LUG, AND LOCK NUT

    LIGHTLY GREASE ALL MATING SURFACES

    REMOVE EJECTOR FROM BOLT FACE

    INSTALL BOLT INTO ACTION

    INSTALL GO GAUGE OR KNOWN GOOD CARTRIDGE IN BOLT FACE

    REMOVE THE LOCK NUT FROM THE BARREL AND APPLY A SMALL DROP OF BLUE NON PERMANENT LOC-TITE TO THREADS

    HAND TIGHTEN LOCK NUT ONTO BARREL TILL IT STOPS AND SLIDE RECOIL LUG ONTO BARREL

    TIGHTEN BARREL INTO ACTION GUIDING THE HEADSPACE GAUGE INTO THE CHAMBER

    WHEN THE BARREL IS SCREWED IN TILL THE POINT THAT IT IS HITTING ON THE GAGE - THIS IS MINIMUM HEADSPACE

    THE GRADUATED MARKS ON THE BARREL SHANK REPRESENT .0017 OF HEADSPACE ADJUSTMENT PER LINE

    BACK THE BARREL OFF APPROX ONE GRADUATED LINE TO GIVE PROPER CLEARANCE FOR HEADSPACE

    MORE OR LESS HEADSPACE ADJUSTMENT MAY BE REQUIRED DEPENDING ON YOUR APPLICATION

    TIGHTEN DOWN LOCK NUT WITH A FACTORY SAVAGE BARREL NUT WRENCH MAKING SURE THAT RECOIL LUG IS ALIGNED PROPERLY WITH AN ALIGNMENT TOOL OR SIMILAR

    THE NUT SHOULD BE TORQUED TO A MINIMUM OF 50 FOOT POUNDS

    TEST THE FIT OF BOTH GO AND NO-GAGES IN THE CHAMBER TO ASSURE PROPER HEADSPACE HAS BEEN SET

    Learn More
    $200.00
  6. KAK REM 700 9 INCH 458 SOCOM HEAVY PROFILE KAK REM 700 9 INCH 458 SOCOM HEAVY PROFILE

    KAK REM 700 9 INCH 458 SOCOM HEAVY PROFILE

    KAK INDUSTRY 9 INCH  458 SOCOM  REMINGTON 700

    USES THE SAVAGE "STYLE" BARREL NUT SYSTEM

    INCLUDES BARREL AND LOCK NUT

    9 INCH KAK HEAVY CONTOUR (INTENDED FOR CHASSIS GUNS)

    458 SOCOM  CHAMBER

    1:14 TWIST

    41V50 STEEL

    MUZZLE THREADED 5/8-24

    MATTE BLASTED BLACK FINISH

    GRADUATED MARKS ON THE BARREL SHANK ALLOW FOR PRECISE HEADSPACE ADJUSTMENTS IN .0017 INCREMENTS

    KAK INDUSTRY PROUDLY USES GREEN MOUNTAIN RIFLE BARREL BLANKS

    SOME INLETTING MAY BE REQUIRED AROUND THE BARREL NUT AND CONTOUR DEPENDING ON YOUR STOCK

     

    PLEASE CONSULT A QUALIFIED GUNSMITH WHEN INSTALLING

     

    THESE BARRELS ARE FOR REMINGTON BOLT ACTIONS (MDL700, MDL7, ETC) HOWEVER THEY USE A SAVAGE "STYLE" BARREL NUT SYSTEM FOR EASE OF INSTALLATION.  

    THE BARREL AND LOCK NUT ARE INCLUDED IN THE PACKAGE

     

    INSTALL INSTRUCTIONS

    MAKE SURE ALL MATING SURFACES ARE CLEAN ON ACTION FACE, RECOIL LUG, AND LOCK NUT

    LIGHTLY GREASE ALL MATING SURFACES

    REMOVE EJECTOR FROM BOLT FACE

    INSTALL BOLT INTO ACTION

    INSTALL GO GAUGE OR KNOWN GOOD CARTRIDGE IN BOLT FACE

    REMOVE THE LOCK NUT FROM THE BARREL AND APPLY A SMALL DROP OF BLUE NON PERMANENT LOC-TITE TO THREADS

    HAND TIGHTEN LOCK NUT ONTO BARREL TILL IT STOPS AND SLIDE RECOIL LUG ONTO BARREL

    TIGHTEN BARREL INTO ACTION GUIDING THE HEADSPACE GAUGE INTO THE CHAMBER

    WHEN THE BARREL IS SCREWED IN TILL THE POINT THAT IT IS HITTING ON THE GAGE - THIS IS MINIMUM HEADSPACE

    THE GRADUATED MARKS ON THE BARREL SHANK REPRESENT .0017 OF HEADSPACE ADJUSTMENT PER LINE

    BACK THE BARREL OFF APPROX ONE GRADUATED LINE TO GIVE PROPER CLEARANCE FOR HEADSPACE

    MORE OR LESS HEADSPACE ADJUSTMENT MAY BE REQUIRED DEPENDING ON YOUR APPLICATION

    TIGHTEN DOWN LOCK NUT WITH A FACTORY SAVAGE BARREL NUT WRENCH MAKING SURE THAT RECOIL LUG IS ALIGNED PROPERLY WITH AN ALIGNMENT TOOL OR SIMILAR

    THE NUT SHOULD BE TORQUED TO A MINIMUM OF 50 FOOT POUNDS

    TEST THE FIT OF BOTH GO AND NO-GAGES IN THE CHAMBER TO ASSURE PROPER HEADSPACE HAS BEEN SET

    Learn More
    $150.00
  7. KAK REM 700 10.5 INCH 458 SOCOM HEAVY PROFILE KAK REM 700 10.5 INCH 458 SOCOM HEAVY PROFILE

    KAK REM 700 10.5 INCH 458 SOCOM HEAVY PROFILE

    KAK INDUSTRY 10.5 458 SOCOM  REMINGTON 700

    USES THE SAVAGE "STYLE" BARREL NUT SYSTEM

    INCLUDES BARREL AND LOCK NUT

    10.5 INCH KAK HEAVY CONTOUR (INTENDED FOR CHASSIS GUNS)

    458 SOCOM  CHAMBER

    1:14 TWIST

    41V50 STEEL

    MUZZLE THREADED 5/8-24

    MATTE BLASTED BLACK FINISH

    GRADUATED MARKS ON THE BARREL SHANK ALLOW FOR PRECISE HEADSPACE ADJUSTMENTS IN .0017 INCREMENTS

    KAK INDUSTRY PROUDLY USES GREEN MOUNTAIN RIFLE BARREL BLANKS

    SOME INLETTING MAY BE REQUIRED AROUND THE BARREL NUT AND CONTOUR DEPENDING ON YOUR STOCK

     

    PLEASE CONSULT A QUALIFIED GUNSMITH WHEN INSTALLING

     

    THESE BARRELS ARE FOR REMINGTON BOLT ACTIONS (MDL700, MDL7, ETC) HOWEVER THEY USE A SAVAGE "STYLE" BARREL NUT SYSTEM FOR EASE OF INSTALLATION.  

    THE BARREL AND LOCK NUT ARE INCLUDED IN THE PACKAGE

     

    INSTALL INSTRUCTIONS

    MAKE SURE ALL MATING SURFACES ARE CLEAN ON ACTION FACE, RECOIL LUG, AND LOCK NUT

    LIGHTLY GREASE ALL MATING SURFACES

    REMOVE EJECTOR FROM BOLT FACE

    INSTALL BOLT INTO ACTION

    INSTALL GO GAUGE OR KNOWN GOOD CARTRIDGE IN BOLT FACE

    REMOVE THE LOCK NUT FROM THE BARREL AND APPLY A SMALL DROP OF BLUE NON PERMANENT LOC-TITE TO THREADS

    HAND TIGHTEN LOCK NUT ONTO BARREL TILL IT STOPS AND SLIDE RECOIL LUG ONTO BARREL

    TIGHTEN BARREL INTO ACTION GUIDING THE HEADSPACE GAUGE INTO THE CHAMBER

    WHEN THE BARREL IS SCREWED IN TILL THE POINT THAT IT IS HITTING ON THE GAGE - THIS IS MINIMUM HEADSPACE

    THE GRADUATED MARKS ON THE BARREL SHANK REPRESENT .0017 OF HEADSPACE ADJUSTMENT PER LINE

    BACK THE BARREL OFF APPROX ONE GRADUATED LINE TO GIVE PROPER CLEARANCE FOR HEADSPACE

    MORE OR LESS HEADSPACE ADJUSTMENT MAY BE REQUIRED DEPENDING ON YOUR APPLICATION

    TIGHTEN DOWN LOCK NUT WITH A FACTORY SAVAGE BARREL NUT WRENCH MAKING SURE THAT RECOIL LUG IS ALIGNED PROPERLY WITH AN ALIGNMENT TOOL OR SIMILAR

    THE NUT SHOULD BE TORQUED TO A MINIMUM OF 50 FOOT POUNDS

    TEST THE FIT OF BOTH GO AND NO-GAGES IN THE CHAMBER TO ASSURE PROPER HEADSPACE HAS BEEN SET

    Learn More
    $160.00
  8. KAK REM 700 10.5 INCH .308 win 1:10 HEAVY PROFILE KAK REM 700 10.5 INCH .308 win 1:10 HEAVY PROFILE

    KAK REM 700 10.5 INCH .308 win 1:10 HEAVY PROFILE

    KAK INDUSTRY 308 WIN BARREL FOR REMINGTON 700

    USES THE SAVAGE "STYLE" BARREL NUT SYSTEM

    INCLUDES BARREL AND LOCK NUT

     10.5 INCH KAK HEAVY CONTOUR (INTENDED FOR CHASSIS GUNS)

    308 WIN CHAMBER

    1:10 TWIST

    41V50 STEEL 

    MUZZLE THREADED 5/8-24

    MATTE BLASTED BLACK FINISH

    GRADUATED MARKS ON THE BARREL SHANK ALLOW FOR PRECISE HEADSPACE ADJUSTMENTS IN .0017 INCREMENTS

    KAK INDUSTRY PROUDLY USES GREEN MOUNTAIN RIFLE BARREL BLANKS

    SOME INLETTING MAY BE REQUIRED AROUND THE BARREL NUT AND CONTOUR DEPENDING ON YOUR STOCK

     

    PLEASE CONSULT A QUALIFIED GUNSMITH WHEN INSTALLING

     

    THESE BARRELS ARE FOR REMINGTON BOLT ACTIONS (MDL700, MDL7, ETC) HOWEVER THEY USE A SAVAGE "STYLE" BARREL NUT SYSTEM FOR EASE OF INSTALLATION.  

    THE BARREL AND LOCK NUT ARE INCLUDED IN THE PACKAGE

     

    INSTALL INSTRUCTIONS

    MAKE SURE ALL MATING SURFACES ARE CLEAN ON ACTION FACE, RECOIL LUG, AND LOCK NUT

    LIGHTLY GREASE ALL MATING SURFACES

    REMOVE EJECTOR FROM BOLT FACE

    INSTALL BOLT INTO ACTION

    INSTALL GO GAUGE OR KNOWN GOOD CARTRIDGE IN BOLT FACE

    REMOVE THE LOCK NUT FROM THE BARREL AND APPLY A SMALL DROP OF BLUE NON PERMANENT LOC-TITE TO THREADS

    HAND TIGHTEN LOCK NUT ONTO BARREL TILL IT STOPS AND SLIDE RECOIL LUG ONTO BARREL

    TIGHTEN BARREL INTO ACTION GUIDING THE HEADSPACE GAUGE INTO THE CHAMBER

    WHEN THE BARREL IS SCREWED IN TILL THE POINT THAT IT IS HITTING ON THE GAGE - THIS IS MINIMUM HEADSPACE

    THE GRADUATED MARKS ON THE BARREL SHANK REPRESENT .0017 OF HEADSPACE ADJUSTMENT PER LINE

    BACK THE BARREL OFF APPROX ONE GRADUATED LINE TO GIVE PROPER CLEARANCE FOR HEADSPACE

    MORE OR LESS HEADSPACE ADJUSTMENT MAY BE REQUIRED DEPENDING ON YOUR APPLICATION

    TIGHTEN DOWN LOCK NUT WITH A FACTORY SAVAGE BARREL NUT WRENCH MAKING SURE THAT RECOIL LUG IS ALIGNED PROPERLY WITH AN ALIGNMENT TOOL OR SIMILAR

    THE NUT SHOULD BE TORQUED TO A MINIMUM OF 50 FOOT POUNDS

    TEST THE FIT OF BOTH GO AND NO-GAGES IN THE CHAMBER TO ASSURE PROPER HEADSPACE HAS BEEN SET

    Learn More
    $145.00
  9. KAK REM 700 12.5 INCH .308 win 1:10 HEAVY PROFILE KAK REM 700 12.5 INCH .308 win 1:10 HEAVY PROFILE

    KAK REM 700 12.5 INCH .308 win 1:10 HEAVY PROFILE

    KAK INDUSTRY 308 WIN BARREL FOR REMINGTON 700

    USES THE SAVAGE "STYLE" BARREL NUT SYSTEM

    INCLUDES BARREL AND LOCK NUT

     12.5 INCH KAK HEAVY CONTOUR (INTENDED FOR CHASSIS GUNS)

    308 WIN CHAMBER

    1:10 TWIST

    41V50 STEEL 

    MUZZLE THREADED 5/8-24

    MATTE BLASTED BLACK FINISH

    GRADUATED MARKS ON THE BARREL SHANK ALLOW FOR PRECISE HEADSPACE ADJUSTMENTS IN .0017 INCREMENTS

    KAK INDUSTRY PROUDLY USES GREEN MOUNTAIN RIFLE BARREL BLANKS

    SOME INLETTING MAY BE REQUIRED AROUND THE BARREL NUT AND CONTOUR DEPENDING ON YOUR STOCK

     

    PLEASE CONSULT A QUALIFIED GUNSMITH WHEN INSTALLING

     

    THESE BARRELS ARE FOR REMINGTON BOLT ACTIONS (MDL700, MDL7, ETC) HOWEVER THEY USE A SAVAGE "STYLE" BARREL NUT SYSTEM FOR EASE OF INSTALLATION.  

    THE BARREL AND LOCK NUT ARE INCLUDED IN THE PACKAGE

     

    INSTALL INSTRUCTIONS

    MAKE SURE ALL MATING SURFACES ARE CLEAN ON ACTION FACE, RECOIL LUG, AND LOCK NUT

    LIGHTLY GREASE ALL MATING SURFACES

    REMOVE EJECTOR FROM BOLT FACE

    INSTALL BOLT INTO ACTION

    INSTALL GO GAUGE OR KNOWN GOOD CARTRIDGE IN BOLT FACE

    REMOVE THE LOCK NUT FROM THE BARREL AND APPLY A SMALL DROP OF BLUE NON PERMANENT LOC-TITE TO THREADS

    HAND TIGHTEN LOCK NUT ONTO BARREL TILL IT STOPS AND SLIDE RECOIL LUG ONTO BARREL

    TIGHTEN BARREL INTO ACTION GUIDING THE HEADSPACE GAUGE INTO THE CHAMBER

    WHEN THE BARREL IS SCREWED IN TILL THE POINT THAT IT IS HITTING ON THE GAGE - THIS IS MINIMUM HEADSPACE

    THE GRADUATED MARKS ON THE BARREL SHANK REPRESENT .0017 OF HEADSPACE ADJUSTMENT PER LINE

    BACK THE BARREL OFF APPROX ONE GRADUATED LINE TO GIVE PROPER CLEARANCE FOR HEADSPACE

    MORE OR LESS HEADSPACE ADJUSTMENT MAY BE REQUIRED DEPENDING ON YOUR APPLICATION

    TIGHTEN DOWN LOCK NUT WITH A FACTORY SAVAGE BARREL NUT WRENCH MAKING SURE THAT RECOIL LUG IS ALIGNED PROPERLY WITH AN ALIGNMENT TOOL OR SIMILAR

    THE NUT SHOULD BE TORQUED TO A MINIMUM OF 50 FOOT POUNDS

    TEST THE FIT OF BOTH GO AND NO-GAGES IN THE CHAMBER TO ASSURE PROPER HEADSPACE HAS BEEN SET

    Learn More
    $155.00
  10. KAK REM 700 16 INCH 300 BLACKOUT SPORTER PROFILE KAK REM 700 16 INCH 300 BLACKOUT SPORTER PROFILE

    KAK REM 700 16 INCH 300 BLACKOUT SPORTER PROFILE

    KAK INDUSTRY 300 BLK BARREL FOR REMINGTON 700

    USES THE SAVAGE "STYLE" BARREL NUT SYSTEM

    INCLUDES BARREL AND LOCK NUT

     

    16.0 INCH SPORTER CONTOUR

    300 BLK CHAMBER

    1:7 TWIST

    41V50 STEEL

    MUZZLE THREADED 5/8-24

    BLASTED MATTE BLACK FINISH

    GRADUATED MARKS ON THE BARREL SHANK ALLOW FOR PRECISE HEADSPACE ADJUSTMENTS IN .0017 INCREMENTS

    KAK INDUSTRY PROUDLY USES GREEN MOUNTAIN RIFLE BARREL BLANKS

    SOME INLETTING MAY BE REQUIRED AROUND THE BARREL NUT AND CONTOUR DEPENDING ON YOUR STOCK

     

    PLEASE CONSULT A QUALIFIED GUNSMITH WHEN INSTALLING

     

    THESE BARRELS ARE FOR REMINGTON BOLT ACTIONS (MDL700, MDL7, ETC) HOWEVER THEY USE A SAVAGE "STYLE" BARREL NUT SYSTEM FOR EASE OF INSTALLATION.  

    THE BARREL AND LOCK NUT ARE INCLUDED IN THE PACKAGE

     

    INSTALL INSTRUCTIONS

    MAKE SURE ALL MATING SURFACES ARE CLEAN ON ACTION FACE, RECOIL LUG, AND LOCK NUT

    LIGHTLY GREASE ALL MATING SURFACES

    REMOVE EJECTOR FROM BOLT FACE

    INSTALL BOLT INTO ACTION

    INSTALL GO GAUGE OR KNOWN GOOD CARTRIDGE IN BOLT FACE

    REMOVE THE LOCK NUT FROM THE BARREL AND APPLY A SMALL DROP OF BLUE NON PERMANENT LOC-TITE TO THREADS

    HAND TIGHTEN LOCK NUT ONTO BARREL TILL IT STOPS AND SLIDE RECOIL LUG ONTO BARREL

    TIGHTEN BARREL INTO ACTION GUIDING THE HEADSPACE GAUGE INTO THE CHAMBER

    WHEN THE BARREL IS SCREWED IN TILL THE POINT THAT IT IS HITTING ON THE GAGE - THIS IS MINIMUM HEADSPACE

    THE GRADUATED MARKS ON THE BARREL SHANK REPRESENT .0017 OF HEADSPACE ADJUSTMENT PER LINE

    BACK THE BARREL OFF APPROX ONE GRADUATED LINE TO GIVE PROPER CLEARANCE FOR HEADSPACE

    MORE OR LESS HEADSPACE ADJUSTMENT MAY BE REQUIRED DEPENDING ON YOUR APPLICATION

    TIGHTEN DOWN LOCK NUT WITH A FACTORY SAVAGE BARREL NUT WRENCH MAKING SURE THAT RECOIL LUG IS ALIGNED PROPERLY WITH AN ALIGNMENT TOOL OR SIMILAR

    THE NUT SHOULD BE TORQUED TO A MINIMUM OF 50 FOOT POUNDS

    TEST THE FIT OF BOTH GO AND NO-GAGES IN THE CHAMBER TO ASSURE PROPER HEADSPACE HAS BEEN SET

    Learn More
    $200.00
  11. KAK REM 700 9 INCH 300 BLK HEAVY PROFILE KAK REM 700 9 INCH 300 BLK HEAVY PROFILE

    KAK REM 700 9 INCH 300 BLK HEAVY PROFILE

    KAK INDUSTRY 9 INCH 300 BLACKOUT  REMINGTON 700

    USES THE SAVAGE "STYLE" BARREL NUT SYSTEM

    INCLUDES BARREL AND LOCK NUT

    9 INCH KAK HEAVY CONTOUR (INTENDED FOR CHASSIS GUNS)

    300 BLK CHAMBER

    1:8 TWIST

    41V50 STEEL

    MUZZLE THREADED 5/8-24

    MATTE BLASTED BLACK FINISH

    GRADUATED MARKS ON THE BARREL SHANK ALLOW FOR PRECISE HEADSPACE ADJUSTMENTS IN .0017 INCREMENTS

    KAK INDUSTRY PROUDLY USES GREEN MOUNTAIN RIFLE BARREL BLANKS

    SOME INLETTING MAY BE REQUIRED AROUND THE BARREL NUT AND CONTOUR DEPENDING ON YOUR STOCK

     

    PLEASE CONSULT A QUALIFIED GUNSMITH WHEN INSTALLING

     

    THESE BARRELS ARE FOR REMINGTON BOLT ACTIONS (MDL700, MDL7, ETC) HOWEVER THEY USE A SAVAGE "STYLE" BARREL NUT SYSTEM FOR EASE OF INSTALLATION.  

    THE BARREL AND LOCK NUT ARE INCLUDED IN THE PACKAGE

     

    INSTALL INSTRUCTIONS

    MAKE SURE ALL MATING SURFACES ARE CLEAN ON ACTION FACE, RECOIL LUG, AND LOCK NUT

    LIGHTLY GREASE ALL MATING SURFACES

    REMOVE EJECTOR FROM BOLT FACE

    INSTALL BOLT INTO ACTION

    INSTALL GO GAUGE OR KNOWN GOOD CARTRIDGE IN BOLT FACE

    REMOVE THE LOCK NUT FROM THE BARREL AND APPLY A SMALL DROP OF BLUE NON PERMANENT LOC-TITE TO THREADS

    HAND TIGHTEN LOCK NUT ONTO BARREL TILL IT STOPS AND SLIDE RECOIL LUG ONTO BARREL

    TIGHTEN BARREL INTO ACTION GUIDING THE HEADSPACE GAUGE INTO THE CHAMBER

    WHEN THE BARREL IS SCREWED IN TILL THE POINT THAT IT IS HITTING ON THE GAGE - THIS IS MINIMUM HEADSPACE

    THE GRADUATED MARKS ON THE BARREL SHANK REPRESENT .0017 OF HEADSPACE ADJUSTMENT PER LINE

    BACK THE BARREL OFF APPROX ONE GRADUATED LINE TO GIVE PROPER CLEARANCE FOR HEADSPACE

    MORE OR LESS HEADSPACE ADJUSTMENT MAY BE REQUIRED DEPENDING ON YOUR APPLICATION

    TIGHTEN DOWN LOCK NUT WITH A FACTORY SAVAGE BARREL NUT WRENCH MAKING SURE THAT RECOIL LUG IS ALIGNED PROPERLY WITH AN ALIGNMENT TOOL OR SIMILAR

    THE NUT SHOULD BE TORQUED TO A MINIMUM OF 50 FOOT POUNDS

    TEST THE FIT OF BOTH GO AND NO-GAGES IN THE CHAMBER TO ASSURE PROPER HEADSPACE HAS BEEN SET

    Learn More
    $140.00
  12. KAK REM 700 6.5 INCH 300 BLK HEAVY PROFILE KAK REM 700 6.5 INCH 300 BLK HEAVY PROFILE

    KAK REM 700 6.5 INCH 300 BLK HEAVY PROFILE

    KAK INDUSTRY 6.5 300 BLACKOUT  REMINGTON 700

    USES THE SAVAGE "STYLE" BARREL NUT SYSTEM

    INCLUDES BARREL AND LOCK NUT

    6.5 INCH KAK HEAVY CONTOUR (INTENDED FOR CHASSIS GUNS)

    300 BLK CHAMBER

    1:8 TWIST

    41V50 STEEL

    MUZZLE THREADED 5/8-24

    MATTE BLASTED BLACK FINISH

    GRADUATED MARKS ON THE BARREL SHANK ALLOW FOR PRECISE HEADSPACE ADJUSTMENTS IN .0017 INCREMENTS

    KAK INDUSTRY PROUDLY USES GREEN MOUNTAIN RIFLE BARREL BLANKS

    SOME INLETTING MAY BE REQUIRED AROUND THE BARREL NUT AND CONTOUR DEPENDING ON YOUR STOCK

     

    PLEASE CONSULT A QUALIFIED GUNSMITH WHEN INSTALLING

     

    THESE BARRELS ARE FOR REMINGTON BOLT ACTIONS (MDL700, MDL7, ETC) HOWEVER THEY USE A SAVAGE "STYLE" BARREL NUT SYSTEM FOR EASE OF INSTALLATION.  

    THE BARREL AND LOCK NUT ARE INCLUDED IN THE PACKAGE

     

    INSTALL INSTRUCTIONS

    MAKE SURE ALL MATING SURFACES ARE CLEAN ON ACTION FACE, RECOIL LUG, AND LOCK NUT

    LIGHTLY GREASE ALL MATING SURFACES

    REMOVE EJECTOR FROM BOLT FACE

    INSTALL BOLT INTO ACTION

    INSTALL GO GAUGE OR KNOWN GOOD CARTRIDGE IN BOLT FACE

    REMOVE THE LOCK NUT FROM THE BARREL AND APPLY A SMALL DROP OF BLUE NON PERMANENT LOC-TITE TO THREADS

    HAND TIGHTEN LOCK NUT ONTO BARREL TILL IT STOPS AND SLIDE RECOIL LUG ONTO BARREL

    TIGHTEN BARREL INTO ACTION GUIDING THE HEADSPACE GAUGE INTO THE CHAMBER

    WHEN THE BARREL IS SCREWED IN TILL THE POINT THAT IT IS HITTING ON THE GAGE - THIS IS MINIMUM HEADSPACE

    THE GRADUATED MARKS ON THE BARREL SHANK REPRESENT .0017 OF HEADSPACE ADJUSTMENT PER LINE

    BACK THE BARREL OFF APPROX ONE GRADUATED LINE TO GIVE PROPER CLEARANCE FOR HEADSPACE

    MORE OR LESS HEADSPACE ADJUSTMENT MAY BE REQUIRED DEPENDING ON YOUR APPLICATION

    TIGHTEN DOWN LOCK NUT WITH A FACTORY SAVAGE BARREL NUT WRENCH MAKING SURE THAT RECOIL LUG IS ALIGNED PROPERLY WITH AN ALIGNMENT TOOL OR SIMILAR

    THE NUT SHOULD BE TORQUED TO A MINIMUM OF 50 FOOT POUNDS

    TEST THE FIT OF BOTH GO AND NO-GAGES IN THE CHAMBER TO ASSURE PROPER HEADSPACE HAS BEEN SET

    Learn More
    $125.00
  13. KAK REM 700 10.5 INCH 300 BLK HEAVY PROFILE KAK REM 700 10.5 INCH 300 BLK HEAVY PROFILE

    KAK REM 700 10.5 INCH 300 BLK HEAVY PROFILE

    KAK INDUSTRY 10.5 300 BLACKOUT  REMINGTON 700

    USES THE SAVAGE "STYLE" BARREL NUT SYSTEM

    INCLUDES BARREL AND LOCK NUT

    10.5 INCH KAK HEAVY CONTOUR (INTENDED FOR CHASSIS GUNS)

    300 BLK CHAMBER

    1:8 TWIST

    41V50 STEEL

    MUZZLE THREADED 5/8-24

    MATTE BLASTED BLACK FINISH

    GRADUATED MARKS ON THE BARREL SHANK ALLOW FOR PRECISE HEADSPACE ADJUSTMENTS IN .0017 INCREMENTS

    KAK INDUSTRY PROUDLY USES GREEN MOUNTAIN RIFLE BARREL BLANKS

    SOME INLETTING MAY BE REQUIRED AROUND THE BARREL NUT AND CONTOUR DEPENDING ON YOUR STOCK

     

    PLEASE CONSULT A QUALIFIED GUNSMITH WHEN INSTALLING

     

    THESE BARRELS ARE FOR REMINGTON BOLT ACTIONS (MDL700, MDL7, ETC) HOWEVER THEY USE A SAVAGE "STYLE" BARREL NUT SYSTEM FOR EASE OF INSTALLATION.  

    THE BARREL AND LOCK NUT ARE INCLUDED IN THE PACKAGE

     

    INSTALL INSTRUCTIONS

    MAKE SURE ALL MATING SURFACES ARE CLEAN ON ACTION FACE, RECOIL LUG, AND LOCK NUT

    LIGHTLY GREASE ALL MATING SURFACES

    REMOVE EJECTOR FROM BOLT FACE

    INSTALL BOLT INTO ACTION

    INSTALL GO GAUGE OR KNOWN GOOD CARTRIDGE IN BOLT FACE

    REMOVE THE LOCK NUT FROM THE BARREL AND APPLY A SMALL DROP OF BLUE NON PERMANENT LOC-TITE TO THREADS

    HAND TIGHTEN LOCK NUT ONTO BARREL TILL IT STOPS AND SLIDE RECOIL LUG ONTO BARREL

    TIGHTEN BARREL INTO ACTION GUIDING THE HEADSPACE GAUGE INTO THE CHAMBER

    WHEN THE BARREL IS SCREWED IN TILL THE POINT THAT IT IS HITTING ON THE GAGE - THIS IS MINIMUM HEADSPACE

    THE GRADUATED MARKS ON THE BARREL SHANK REPRESENT .0017 OF HEADSPACE ADJUSTMENT PER LINE

    BACK THE BARREL OFF APPROX ONE GRADUATED LINE TO GIVE PROPER CLEARANCE FOR HEADSPACE

    MORE OR LESS HEADSPACE ADJUSTMENT MAY BE REQUIRED DEPENDING ON YOUR APPLICATION

    TIGHTEN DOWN LOCK NUT WITH A FACTORY SAVAGE BARREL NUT WRENCH MAKING SURE THAT RECOIL LUG IS ALIGNED PROPERLY WITH AN ALIGNMENT TOOL OR SIMILAR

    THE NUT SHOULD BE TORQUED TO A MINIMUM OF 50 FOOT POUNDS

    TEST THE FIT OF BOTH GO AND NO-GAGES IN THE CHAMBER TO ASSURE PROPER HEADSPACE HAS BEEN SET

    Learn More
    $150.00
  14. KAK REM 700 9 INCH 9X39 SS 416R HEAVY PROFILE BARREL KAK REM 700 9 INCH 9X39 SS 416R HEAVY PROFILE BARREL

    KAK REM 700 9 INCH 9X39 SS 416R HEAVY PROFILE BARREL

    KAK INDUSTRY 9 INCH 9X39 STAINLESS STEEL 416R

    REMINGTON 700

    USES THE SAVAGE "STYLE" BARREL NUT SYSTEM

    INCLUDES BARREL AND LOCK NUT

    9 INCH KAK HEAVY CONTOUR (INTENDED FOR CHASSIS GUNS)

    9X39 CHAMBER

    1:7 TWIST

    STAINLESS STEEL

    MUZZLE THREADED 5/8-24

    GRADUATED MARKS ON THE BARREL SHANK ALLOW FOR PRECISE HEADSPACE ADJUSTMENTS IN .0017 INCREMENTS

    KAK INDUSTRY PROUDLY USES GREEN MOUNTAIN RIFLE BARREL BLANKS

    SOME INLETTING MAY BE REQUIRED AROUND THE BARREL NUT AND CONTOUR DEPENDING ON YOUR STOCK

     

    PLEASE CONSULT A QUALIFIED GUNSMITH WHEN INSTALLING

     

    THESE BARRELS ARE FOR REMINGTON BOLT ACTIONS (MDL700, MDL7, ETC) HOWEVER THEY USE A SAVAGE "STYLE" BARREL NUT SYSTEM FOR EASE OF INSTALLATION.  

    THE BARREL AND LOCK NUT ARE INCLUDED IN THE PACKAGE

     

    INSTALL INSTRUCTIONS

    MAKE SURE ALL MATING SURFACES ARE CLEAN ON ACTION FACE, RECOIL LUG, AND LOCK NUT

    LIGHTLY GREASE ALL MATING SURFACES

    REMOVE EJECTOR FROM BOLT FACE

    INSTALL BOLT INTO ACTION

    INSTALL GO GAUGE OR KNOWN GOOD CARTRIDGE IN BOLT FACE

    REMOVE THE LOCK NUT FROM THE BARREL AND APPLY A SMALL DROP OF BLUE NON PERMANENT LOC-TITE TO THREADS

    HAND TIGHTEN LOCK NUT ONTO BARREL TILL IT STOPS AND SLIDE RECOIL LUG ONTO BARREL

    TIGHTEN BARREL INTO ACTION GUIDING THE HEADSPACE GAUGE INTO THE CHAMBER

    WHEN THE BARREL IS SCREWED IN TILL THE POINT THAT IT IS HITTING ON THE GAGE - THIS IS MINIMUM HEADSPACE

    THE GRADUATED MARKS ON THE BARREL SHANK REPRESENT .0017 OF HEADSPACE ADJUSTMENT PER LINE

    BACK THE BARREL OFF APPROX ONE GRADUATED LINE TO GIVE PROPER CLEARANCE FOR HEADSPACE

    MORE OR LESS HEADSPACE ADJUSTMENT MAY BE REQUIRED DEPENDING ON YOUR APPLICATION

    TIGHTEN DOWN LOCK NUT WITH A FACTORY SAVAGE BARREL NUT WRENCH MAKING SURE THAT RECOIL LUG IS ALIGNED PROPERLY WITH AN ALIGNMENT TOOL OR SIMILAR

    THE NUT SHOULD BE TORQUED TO A MINIMUM OF 50 FOOT POUNDS

    TEST THE FIT OF BOTH GO AND NO-GAGES IN THE CHAMBER TO ASSURE PROPER HEADSPACE HAS BEEN SET

    Learn More
    $150.00
  15. REM 700 BARREL NUT REM 700 BARREL NUT

    REM 700 BARREL NUT

    REM 700 BARREL NUT 

    THIS IS THE SAME NUT THAT IS USED WITH OUR SAVAGE STYLE REMINGTON 700 BARRELS

    1-1/16 X 16 THREADS

    NOT FOR REAL SAVAGE BARRELS Learn More
    $15.00
  16. KAK REM 700 16 INCH 350 LEGEND HEAVY PROFILE KAK REM 700 16 INCH 350 LEGEND HEAVY PROFILE

    KAK REM 700 16 INCH 350 LEGEND HEAVY PROFILE

    KAK INDUSTRY 350 LEGEND  BARREL FOR REMINGTON 700

    USES THE SAVAGE "STYLE" BARREL NUT SYSTEM

    INCLUDES BARREL AND LOCK NUT

     

    16.0 INCH HEAVY CONTOUR

    350 LEGEND CHAMBER

    416R STAINLESS STEEL

    MUZZLE THREADED 5/8-24

    GREY BLASTED FINISH 

    GRADUATED MARKS ON THE BARREL SHANK ALLOW FOR PRECISE HEADSPACE ADJUSTMENTS IN .0017 INCREMENTS

    KAK INDUSTRY PROUDLY USES GREEN MOUNTAIN RIFLE BARREL BLANKS

    SOME INLETTING MAY BE REQUIRED AROUND THE BARREL NUT AND CONTOUR DEPENDING ON YOUR STOCK

     

    PLEASE CONSULT A QUALIFIED GUNSMITH WHEN INSTALLING

     

    THESE BARRELS ARE FOR REMINGTON BOLT ACTIONS (MDL700, MDL7, ETC) HOWEVER THEY USE A SAVAGE "STYLE" BARREL NUT SYSTEM FOR EASE OF INSTALLATION.  

    THE BARREL AND LOCK NUT ARE INCLUDED IN THE PACKAGE

     

    INSTALL INSTRUCTIONS

    MAKE SURE ALL MATING SURFACES ARE CLEAN ON ACTION FACE, RECOIL LUG, AND LOCK NUT

    LIGHTLY GREASE ALL MATING SURFACES

    REMOVE EJECTOR FROM BOLT FACE

    INSTALL BOLT INTO ACTION

    INSTALL GO GAUGE OR KNOWN GOOD CARTRIDGE IN BOLT FACE

    REMOVE THE LOCK NUT FROM THE BARREL AND APPLY A SMALL DROP OF BLUE NON PERMANENT LOC-TITE TO THREADS

    HAND TIGHTEN LOCK NUT ONTO BARREL TILL IT STOPS AND SLIDE RECOIL LUG ONTO BARREL

    TIGHTEN BARREL INTO ACTION GUIDING THE HEADSPACE GAUGE INTO THE CHAMBER

    WHEN THE BARREL IS SCREWED IN TILL THE POINT THAT IT IS HITTING ON THE GAGE - THIS IS MINIMUM HEADSPACE

    THE GRADUATED MARKS ON THE BARREL SHANK REPRESENT .0017 OF HEADSPACE ADJUSTMENT PER LINE

    BACK THE BARREL OFF APPROX ONE GRADUATED LINE TO GIVE PROPER CLEARANCE FOR HEADSPACE

    MORE OR LESS HEADSPACE ADJUSTMENT MAY BE REQUIRED DEPENDING ON YOUR APPLICATION

    TIGHTEN DOWN LOCK NUT WITH A FACTORY SAVAGE BARREL NUT WRENCH MAKING SURE THAT RECOIL LUG IS ALIGNED PROPERLY WITH AN ALIGNMENT TOOL OR SIMILAR

    THE NUT SHOULD BE TORQUED TO A MINIMUM OF 50 FOOT POUNDS

    TEST THE FIT OF BOTH GO AND NO-GAGES IN THE CHAMBER TO ASSURE PROPER HEADSPACE HAS BEEN SET

    Learn More
    $200.00
  17. KAK REM 700 12.5 INCH 350 LEGEND HEAVY PROFILE KAK REM 700 12.5 INCH 350 LEGEND HEAVY PROFILE

    KAK REM 700 12.5 INCH 350 LEGEND HEAVY PROFILE

    KAK INDUSTRY 350 LEGEND  BARREL FOR REMINGTON 700

    USES THE SAVAGE "STYLE" BARREL NUT SYSTEM

    INCLUDES BARREL AND LOCK NUT

     12.5  INCH HEAVY CONTOUR

    350 LEGEND CHAMBER

    416R STAINLESS STEEL

    MUZZLE THREADED 5/8-24

    GREY BLASTED FINISH 

    GRADUATED MARKS ON THE BARREL SHANK ALLOW FOR PRECISE HEADSPACE ADJUSTMENTS IN .0017 INCREMENTS

    KAK INDUSTRY PROUDLY USES GREEN MOUNTAIN RIFLE BARREL BLANKS

    SOME INLETTING MAY BE REQUIRED AROUND THE BARREL NUT AND CONTOUR DEPENDING ON YOUR STOCK

     

    PLEASE CONSULT A QUALIFIED GUNSMITH WHEN INSTALLING

     

    THESE BARRELS ARE FOR REMINGTON BOLT ACTIONS (MDL700, MDL7, ETC) HOWEVER THEY USE A SAVAGE "STYLE" BARREL NUT SYSTEM FOR EASE OF INSTALLATION.  

    THE BARREL AND LOCK NUT ARE INCLUDED IN THE PACKAGE

     

    INSTALL INSTRUCTIONS

    MAKE SURE ALL MATING SURFACES ARE CLEAN ON ACTION FACE, RECOIL LUG, AND LOCK NUT

    LIGHTLY GREASE ALL MATING SURFACES

    REMOVE EJECTOR FROM BOLT FACE

    INSTALL BOLT INTO ACTION

    INSTALL GO GAUGE OR KNOWN GOOD CARTRIDGE IN BOLT FACE

    REMOVE THE LOCK NUT FROM THE BARREL AND APPLY A SMALL DROP OF BLUE NON PERMANENT LOC-TITE TO THREADS

    HAND TIGHTEN LOCK NUT ONTO BARREL TILL IT STOPS AND SLIDE RECOIL LUG ONTO BARREL

    TIGHTEN BARREL INTO ACTION GUIDING THE HEADSPACE GAUGE INTO THE CHAMBER

    WHEN THE BARREL IS SCREWED IN TILL THE POINT THAT IT IS HITTING ON THE GAGE - THIS IS MINIMUM HEADSPACE

    THE GRADUATED MARKS ON THE BARREL SHANK REPRESENT .0017 OF HEADSPACE ADJUSTMENT PER LINE

    BACK THE BARREL OFF APPROX ONE GRADUATED LINE TO GIVE PROPER CLEARANCE FOR HEADSPACE

    MORE OR LESS HEADSPACE ADJUSTMENT MAY BE REQUIRED DEPENDING ON YOUR APPLICATION

    TIGHTEN DOWN LOCK NUT WITH A FACTORY SAVAGE BARREL NUT WRENCH MAKING SURE THAT RECOIL LUG IS ALIGNED PROPERLY WITH AN ALIGNMENT TOOL OR SIMILAR

    THE NUT SHOULD BE TORQUED TO A MINIMUM OF 50 FOOT POUNDS

    TEST THE FIT OF BOTH GO AND NO-GAGES IN THE CHAMBER TO ASSURE PROPER HEADSPACE HAS BEEN SET

    Learn More
    $160.00
  18. KAK REM 700 6.5 INCH 350 LEGEND HEAVY PROFILE KAK REM 700 6.5 INCH 350 LEGEND HEAVY PROFILE

    KAK REM 700 6.5 INCH 350 LEGEND HEAVY PROFILE

    KAK INDUSTRY 350 LEGEND  BARREL FOR REMINGTON 700

    USES THE SAVAGE "STYLE" BARREL NUT SYSTEM

    INCLUDES BARREL AND LOCK NUT

     6.5  INCH HEAVY CONTOUR

    350 LEGEND CHAMBER

    416R STAINLESS STEEL

    MUZZLE THREADED 5/8-24

    GREY BLASTED FINISH 

    GRADUATED MARKS ON THE BARREL SHANK ALLOW FOR PRECISE HEADSPACE ADJUSTMENTS IN .0017 INCREMENTS

    KAK INDUSTRY PROUDLY USES GREEN MOUNTAIN RIFLE BARREL BLANKS

    SOME INLETTING MAY BE REQUIRED AROUND THE BARREL NUT AND CONTOUR DEPENDING ON YOUR STOCK

     

    PLEASE CONSULT A QUALIFIED GUNSMITH WHEN INSTALLING

     

    THESE BARRELS ARE FOR REMINGTON BOLT ACTIONS (MDL700, MDL7, ETC) HOWEVER THEY USE A SAVAGE "STYLE" BARREL NUT SYSTEM FOR EASE OF INSTALLATION.  

    THE BARREL AND LOCK NUT ARE INCLUDED IN THE PACKAGE

     

    INSTALL INSTRUCTIONS

    MAKE SURE ALL MATING SURFACES ARE CLEAN ON ACTION FACE, RECOIL LUG, AND LOCK NUT

    LIGHTLY GREASE ALL MATING SURFACES

    REMOVE EJECTOR FROM BOLT FACE

    INSTALL BOLT INTO ACTION

    INSTALL GO GAUGE OR KNOWN GOOD CARTRIDGE IN BOLT FACE

    REMOVE THE LOCK NUT FROM THE BARREL AND APPLY A SMALL DROP OF BLUE NON PERMANENT LOC-TITE TO THREADS

    HAND TIGHTEN LOCK NUT ONTO BARREL TILL IT STOPS AND SLIDE RECOIL LUG ONTO BARREL

    TIGHTEN BARREL INTO ACTION GUIDING THE HEADSPACE GAUGE INTO THE CHAMBER

    WHEN THE BARREL IS SCREWED IN TILL THE POINT THAT IT IS HITTING ON THE GAGE - THIS IS MINIMUM HEADSPACE

    THE GRADUATED MARKS ON THE BARREL SHANK REPRESENT .0017 OF HEADSPACE ADJUSTMENT PER LINE

    BACK THE BARREL OFF APPROX ONE GRADUATED LINE TO GIVE PROPER CLEARANCE FOR HEADSPACE

    MORE OR LESS HEADSPACE ADJUSTMENT MAY BE REQUIRED DEPENDING ON YOUR APPLICATION

    TIGHTEN DOWN LOCK NUT WITH A FACTORY SAVAGE BARREL NUT WRENCH MAKING SURE THAT RECOIL LUG IS ALIGNED PROPERLY WITH AN ALIGNMENT TOOL OR SIMILAR

    THE NUT SHOULD BE TORQUED TO A MINIMUM OF 50 FOOT POUNDS

    TEST THE FIT OF BOTH GO AND NO-GAGES IN THE CHAMBER TO ASSURE PROPER HEADSPACE HAS BEEN SET

    Learn More
    $140.00
  19. KAK REM 700 9 INCH 300 BLK 1:7 5R STAINLESS BARREL KAK REM 700 9 INCH 300 BLK 1:7 5R STAINLESS BARREL

    KAK REM 700 9 INCH 300 BLK 1:7 5R STAINLESS BARREL

    KAK INDUSTRY 9 INCH 300 BLACKOUT  REMINGTON 700

    USES THE SAVAGE "STYLE" BARREL NUT SYSTEM

    INCLUDES BARREL AND LOCK NUT

    9 INCH KAK HEAVY CONTOUR (INTENDED FOR CHASSIS GUNS)

    300 BLK CHAMBER

    1:7 TWIST 

    STAINLESS STEEL

    MUZZLE THREADED 5/8-24

    MATTE BLASTED BLACK FINISH

    GRADUATED MARKS ON THE BARREL SHANK ALLOW FOR PRECISE HEADSPACE ADJUSTMENTS IN .0017 INCREMENTS

    KAK INDUSTRY PROUDLY USES GREEN MOUNTAIN RIFLE BARREL BLANKS

    SOME INLETTING MAY BE REQUIRED AROUND THE BARREL NUT AND CONTOUR DEPENDING ON YOUR STOCK

     

    PLEASE CONSULT A QUALIFIED GUNSMITH WHEN INSTALLING

     

    THESE BARRELS ARE FOR REMINGTON BOLT ACTIONS (MDL700, MDL7, ETC) HOWEVER THEY USE A SAVAGE "STYLE" BARREL NUT SYSTEM FOR EASE OF INSTALLATION.  

    THE BARREL AND LOCK NUT ARE INCLUDED IN THE PACKAGE

     

    INSTALL INSTRUCTIONS

    MAKE SURE ALL MATING SURFACES ARE CLEAN ON ACTION FACE, RECOIL LUG, AND LOCK NUT

    LIGHTLY GREASE ALL MATING SURFACES

    REMOVE EJECTOR FROM BOLT FACE

    INSTALL BOLT INTO ACTION

    INSTALL GO GAUGE OR KNOWN GOOD CARTRIDGE IN BOLT FACE

    REMOVE THE LOCK NUT FROM THE BARREL AND APPLY A SMALL DROP OF BLUE NON PERMANENT LOC-TITE TO THREADS

    HAND TIGHTEN LOCK NUT ONTO BARREL TILL IT STOPS AND SLIDE RECOIL LUG ONTO BARREL

    TIGHTEN BARREL INTO ACTION GUIDING THE HEADSPACE GAUGE INTO THE CHAMBER

    WHEN THE BARREL IS SCREWED IN TILL THE POINT THAT IT IS HITTING ON THE GAGE - THIS IS MINIMUM HEADSPACE

    THE GRADUATED MARKS ON THE BARREL SHANK REPRESENT .0017 OF HEADSPACE ADJUSTMENT PER LINE

    BACK THE BARREL OFF APPROX ONE GRADUATED LINE TO GIVE PROPER CLEARANCE FOR HEADSPACE

    MORE OR LESS HEADSPACE ADJUSTMENT MAY BE REQUIRED DEPENDING ON YOUR APPLICATION

    TIGHTEN DOWN LOCK NUT WITH A FACTORY SAVAGE BARREL NUT WRENCH MAKING SURE THAT RECOIL LUG IS ALIGNED PROPERLY WITH AN ALIGNMENT TOOL OR SIMILAR

    THE NUT SHOULD BE TORQUED TO A MINIMUM OF 50 FOOT POUNDS

    TEST THE FIT OF BOTH GO AND NO-GAGES IN THE CHAMBER TO ASSURE PROPER HEADSPACE HAS BEEN SET

    Learn More
    $165.00
  20. KAK REM 700 9 INCH 300 BLK 1:7 5R STAINLESS BARREL FLUTED KAK REM 700 9 INCH 300 BLK 1:7 5R STAINLESS BARREL FLUTED

    KAK REM 700 9 INCH 300 BLK 1:7 5R STAINLESS BARREL FLUTED

    KAK INDUSTRY 9 INCH 300 BLACKOUT  REMINGTON 700

    USES THE SAVAGE "STYLE" BARREL NUT SYSTEM

    INCLUDES BARREL AND LOCK NUT

    9 INCH KAK HEAVY CONTOUR (INTENDED FOR CHASSIS GUNS)

    300 BLK CHAMBER

    1:7 TWIST 

    STAINLESS STEEL

    FLUTED 

    MUZZLE THREADED 5/8-24

    MATTE BLASTED BLACK FINISH

    GRADUATED MARKS ON THE BARREL SHANK ALLOW FOR PRECISE HEADSPACE ADJUSTMENTS IN .0017 INCREMENTS

    KAK INDUSTRY PROUDLY USES GREEN MOUNTAIN RIFLE BARREL BLANKS

    SOME INLETTING MAY BE REQUIRED AROUND THE BARREL NUT AND CONTOUR DEPENDING ON YOUR STOCK

     

    PLEASE CONSULT A QUALIFIED GUNSMITH WHEN INSTALLING

     

    THESE BARRELS ARE FOR REMINGTON BOLT ACTIONS (MDL700, MDL7, ETC) HOWEVER THEY USE A SAVAGE "STYLE" BARREL NUT SYSTEM FOR EASE OF INSTALLATION.  

    THE BARREL AND LOCK NUT ARE INCLUDED IN THE PACKAGE

     

    INSTALL INSTRUCTIONS

    MAKE SURE ALL MATING SURFACES ARE CLEAN ON ACTION FACE, RECOIL LUG, AND LOCK NUT

    LIGHTLY GREASE ALL MATING SURFACES

    REMOVE EJECTOR FROM BOLT FACE

    INSTALL BOLT INTO ACTION

    INSTALL GO GAUGE OR KNOWN GOOD CARTRIDGE IN BOLT FACE

    REMOVE THE LOCK NUT FROM THE BARREL AND APPLY A SMALL DROP OF BLUE NON PERMANENT LOC-TITE TO THREADS

    HAND TIGHTEN LOCK NUT ONTO BARREL TILL IT STOPS AND SLIDE RECOIL LUG ONTO BARREL

    TIGHTEN BARREL INTO ACTION GUIDING THE HEADSPACE GAUGE INTO THE CHAMBER

    WHEN THE BARREL IS SCREWED IN TILL THE POINT THAT IT IS HITTING ON THE GAGE - THIS IS MINIMUM HEADSPACE

    THE GRADUATED MARKS ON THE BARREL SHANK REPRESENT .0017 OF HEADSPACE ADJUSTMENT PER LINE

    BACK THE BARREL OFF APPROX ONE GRADUATED LINE TO GIVE PROPER CLEARANCE FOR HEADSPACE

    MORE OR LESS HEADSPACE ADJUSTMENT MAY BE REQUIRED DEPENDING ON YOUR APPLICATION

    TIGHTEN DOWN LOCK NUT WITH A FACTORY SAVAGE BARREL NUT WRENCH MAKING SURE THAT RECOIL LUG IS ALIGNED PROPERLY WITH AN ALIGNMENT TOOL OR SIMILAR

    THE NUT SHOULD BE TORQUED TO A MINIMUM OF 50 FOOT POUNDS

    TEST THE FIT OF BOTH GO AND NO-GAGES IN THE CHAMBER TO ASSURE PROPER HEADSPACE HAS BEEN SET

    Learn More
    $190.00
  21. KAK REM 700 10.5 INCH 300 BLK 1:7 5R STAINLESS BARREL KAK REM 700 10.5 INCH 300 BLK 1:7 5R STAINLESS BARREL

    KAK REM 700 10.5 INCH 300 BLK 1:7 5R STAINLESS BARREL

    KAK INDUSTRY 10.5 INCH 300 BLACKOUT  REMINGTON 700

    USES THE SAVAGE "STYLE" BARREL NUT SYSTEM

    INCLUDES BARREL AND LOCK NUT

    10.5 INCH KAK HEAVY CONTOUR (INTENDED FOR CHASSIS GUNS)

    300 BLK CHAMBER

    1:7 TWIST 

    STAINLESS STEEL


    MUZZLE THREADED 5/8-24

    MATTE BLASTED BLACK FINISH

    GRADUATED MARKS ON THE BARREL SHANK ALLOW FOR PRECISE HEADSPACE ADJUSTMENTS IN .0017 INCREMENTS

    KAK INDUSTRY PROUDLY USES GREEN MOUNTAIN RIFLE BARREL BLANKS

    SOME INLETTING MAY BE REQUIRED AROUND THE BARREL NUT AND CONTOUR DEPENDING ON YOUR STOCK

     

    PLEASE CONSULT A QUALIFIED GUNSMITH WHEN INSTALLING

     

    THESE BARRELS ARE FOR REMINGTON BOLT ACTIONS (MDL700, MDL7, ETC) HOWEVER THEY USE A SAVAGE "STYLE" BARREL NUT SYSTEM FOR EASE OF INSTALLATION.  

    THE BARREL AND LOCK NUT ARE INCLUDED IN THE PACKAGE

     

    INSTALL INSTRUCTIONS

    MAKE SURE ALL MATING SURFACES ARE CLEAN ON ACTION FACE, RECOIL LUG, AND LOCK NUT

    LIGHTLY GREASE ALL MATING SURFACES

    REMOVE EJECTOR FROM BOLT FACE

    INSTALL BOLT INTO ACTION

    INSTALL GO GAUGE OR KNOWN GOOD CARTRIDGE IN BOLT FACE

    REMOVE THE LOCK NUT FROM THE BARREL AND APPLY A SMALL DROP OF BLUE NON PERMANENT LOC-TITE TO THREADS

    HAND TIGHTEN LOCK NUT ONTO BARREL TILL IT STOPS AND SLIDE RECOIL LUG ONTO BARREL

    TIGHTEN BARREL INTO ACTION GUIDING THE HEADSPACE GAUGE INTO THE CHAMBER

    WHEN THE BARREL IS SCREWED IN TILL THE POINT THAT IT IS HITTING ON THE GAGE - THIS IS MINIMUM HEADSPACE

    THE GRADUATED MARKS ON THE BARREL SHANK REPRESENT .0017 OF HEADSPACE ADJUSTMENT PER LINE

    BACK THE BARREL OFF APPROX ONE GRADUATED LINE TO GIVE PROPER CLEARANCE FOR HEADSPACE

    MORE OR LESS HEADSPACE ADJUSTMENT MAY BE REQUIRED DEPENDING ON YOUR APPLICATION

    TIGHTEN DOWN LOCK NUT WITH A FACTORY SAVAGE BARREL NUT WRENCH MAKING SURE THAT RECOIL LUG IS ALIGNED PROPERLY WITH AN ALIGNMENT TOOL OR SIMILAR

    THE NUT SHOULD BE TORQUED TO A MINIMUM OF 50 FOOT POUNDS

    TEST THE FIT OF BOTH GO AND NO-GAGES IN THE CHAMBER TO ASSURE PROPER HEADSPACE HAS BEEN SET

    Learn More
    $175.00
  22. KAK REM 700 10.5 INCH 300 BLK 1:7 5R STAINLESS BARREL FLUTED KAK REM 700 10.5 INCH 300 BLK 1:7 5R STAINLESS BARREL FLUTED

    KAK REM 700 10.5 INCH 300 BLK 1:7 5R STAINLESS BARREL FLUTED

    KAK INDUSTRY 10.5 INCH 300 BLACKOUT  REMINGTON 700

    USES THE SAVAGE "STYLE" BARREL NUT SYSTEM

    INCLUDES BARREL AND LOCK NUT

    10.5 INCH KAK HEAVY CONTOUR (INTENDED FOR CHASSIS GUNS)

    300 BLK CHAMBER

    1:7 TWIST 

    STAINLESS STEEL

    FLUTED 

    MUZZLE THREADED 5/8-24

    MATTE BLASTED BLACK FINISH

    GRADUATED MARKS ON THE BARREL SHANK ALLOW FOR PRECISE HEADSPACE ADJUSTMENTS IN .0017 INCREMENTS

    KAK INDUSTRY PROUDLY USES GREEN MOUNTAIN RIFLE BARREL BLANKS

    SOME INLETTING MAY BE REQUIRED AROUND THE BARREL NUT AND CONTOUR DEPENDING ON YOUR STOCK

     

    PLEASE CONSULT A QUALIFIED GUNSMITH WHEN INSTALLING

     

    THESE BARRELS ARE FOR REMINGTON BOLT ACTIONS (MDL700, MDL7, ETC) HOWEVER THEY USE A SAVAGE "STYLE" BARREL NUT SYSTEM FOR EASE OF INSTALLATION.  

    THE BARREL AND LOCK NUT ARE INCLUDED IN THE PACKAGE

     

    INSTALL INSTRUCTIONS

    MAKE SURE ALL MATING SURFACES ARE CLEAN ON ACTION FACE, RECOIL LUG, AND LOCK NUT

    LIGHTLY GREASE ALL MATING SURFACES

    REMOVE EJECTOR FROM BOLT FACE

    INSTALL BOLT INTO ACTION

    INSTALL GO GAUGE OR KNOWN GOOD CARTRIDGE IN BOLT FACE

    REMOVE THE LOCK NUT FROM THE BARREL AND APPLY A SMALL DROP OF BLUE NON PERMANENT LOC-TITE TO THREADS

    HAND TIGHTEN LOCK NUT ONTO BARREL TILL IT STOPS AND SLIDE RECOIL LUG ONTO BARREL

    TIGHTEN BARREL INTO ACTION GUIDING THE HEADSPACE GAUGE INTO THE CHAMBER

    WHEN THE BARREL IS SCREWED IN TILL THE POINT THAT IT IS HITTING ON THE GAGE - THIS IS MINIMUM HEADSPACE

    THE GRADUATED MARKS ON THE BARREL SHANK REPRESENT .0017 OF HEADSPACE ADJUSTMENT PER LINE

    BACK THE BARREL OFF APPROX ONE GRADUATED LINE TO GIVE PROPER CLEARANCE FOR HEADSPACE

    MORE OR LESS HEADSPACE ADJUSTMENT MAY BE REQUIRED DEPENDING ON YOUR APPLICATION

    TIGHTEN DOWN LOCK NUT WITH A FACTORY SAVAGE BARREL NUT WRENCH MAKING SURE THAT RECOIL LUG IS ALIGNED PROPERLY WITH AN ALIGNMENT TOOL OR SIMILAR

    THE NUT SHOULD BE TORQUED TO A MINIMUM OF 50 FOOT POUNDS

    TEST THE FIT OF BOTH GO AND NO-GAGES IN THE CHAMBER TO ASSURE PROPER HEADSPACE HAS BEEN SET

    Learn More
    $200.00
  23. KAK REM 700 6.5 INCH 300 BLK 1:7 5R STAINLESS BARREL FLUTED KAK REM 700 6.5 INCH 300 BLK 1:7 5R STAINLESS BARREL FLUTED

    KAK REM 700 6.5 INCH 300 BLK 1:7 5R STAINLESS BARREL FLUTED

    KAK INDUSTRY 6.5  INCH 300 BLACKOUT  REMINGTON 700

    USES THE SAVAGE "STYLE" BARREL NUT SYSTEM

    INCLUDES BARREL AND LOCK NUT

    6.5 INCH KAK HEAVY CONTOUR (INTENDED FOR CHASSIS GUNS)

    300 BLK CHAMBER

    1:7 TWIST 

    STAINLESS STEEL

    FLUTED 

    MUZZLE THREADED 5/8-24

    MATTE BLASTED BLACK FINISH

    GRADUATED MARKS ON THE BARREL SHANK ALLOW FOR PRECISE HEADSPACE ADJUSTMENTS IN .0017 INCREMENTS

    KAK INDUSTRY PROUDLY USES GREEN MOUNTAIN RIFLE BARREL BLANKS

    SOME INLETTING MAY BE REQUIRED AROUND THE BARREL NUT AND CONTOUR DEPENDING ON YOUR STOCK

     

    PLEASE CONSULT A QUALIFIED GUNSMITH WHEN INSTALLING

     

    THESE BARRELS ARE FOR REMINGTON BOLT ACTIONS (MDL700, MDL7, ETC) HOWEVER THEY USE A SAVAGE "STYLE" BARREL NUT SYSTEM FOR EASE OF INSTALLATION.  

    THE BARREL AND LOCK NUT ARE INCLUDED IN THE PACKAGE

     

    INSTALL INSTRUCTIONS

    MAKE SURE ALL MATING SURFACES ARE CLEAN ON ACTION FACE, RECOIL LUG, AND LOCK NUT

    LIGHTLY GREASE ALL MATING SURFACES

    REMOVE EJECTOR FROM BOLT FACE

    INSTALL BOLT INTO ACTION

    INSTALL GO GAUGE OR KNOWN GOOD CARTRIDGE IN BOLT FACE

    REMOVE THE LOCK NUT FROM THE BARREL AND APPLY A SMALL DROP OF BLUE NON PERMANENT LOC-TITE TO THREADS

    HAND TIGHTEN LOCK NUT ONTO BARREL TILL IT STOPS AND SLIDE RECOIL LUG ONTO BARREL

    TIGHTEN BARREL INTO ACTION GUIDING THE HEADSPACE GAUGE INTO THE CHAMBER

    WHEN THE BARREL IS SCREWED IN TILL THE POINT THAT IT IS HITTING ON THE GAGE - THIS IS MINIMUM HEADSPACE

    THE GRADUATED MARKS ON THE BARREL SHANK REPRESENT .0017 OF HEADSPACE ADJUSTMENT PER LINE

    BACK THE BARREL OFF APPROX ONE GRADUATED LINE TO GIVE PROPER CLEARANCE FOR HEADSPACE

    MORE OR LESS HEADSPACE ADJUSTMENT MAY BE REQUIRED DEPENDING ON YOUR APPLICATION

    TIGHTEN DOWN LOCK NUT WITH A FACTORY SAVAGE BARREL NUT WRENCH MAKING SURE THAT RECOIL LUG IS ALIGNED PROPERLY WITH AN ALIGNMENT TOOL OR SIMILAR

    THE NUT SHOULD BE TORQUED TO A MINIMUM OF 50 FOOT POUNDS

    TEST THE FIT OF BOTH GO AND NO-GAGES IN THE CHAMBER TO ASSURE PROPER HEADSPACE HAS BEEN SET

    Learn More
    $175.00
  24. KAK REM 700 6.5 INCH 300 BLK 1:7 5R STAINLESS BARREL KAK REM 700 6.5 INCH 300 BLK 1:7 5R STAINLESS BARREL

    KAK REM 700 6.5 INCH 300 BLK 1:7 5R STAINLESS BARREL

    KAK INDUSTRY 6.5  INCH 300 BLACKOUT  REMINGTON 700

    USES THE SAVAGE "STYLE" BARREL NUT SYSTEM

    INCLUDES BARREL AND LOCK NUT

    6.5 INCH KAK HEAVY CONTOUR (INTENDED FOR CHASSIS GUNS)

    300 BLK CHAMBER

    1:7 TWIST 

    STAINLESS STEEL

    MUZZLE THREADED 5/8-24

    MATTE BLASTED BLACK FINISH

    GRADUATED MARKS ON THE BARREL SHANK ALLOW FOR PRECISE HEADSPACE ADJUSTMENTS IN .0017 INCREMENTS

    KAK INDUSTRY PROUDLY USES GREEN MOUNTAIN RIFLE BARREL BLANKS

    SOME INLETTING MAY BE REQUIRED AROUND THE BARREL NUT AND CONTOUR DEPENDING ON YOUR STOCK

     

    PLEASE CONSULT A QUALIFIED GUNSMITH WHEN INSTALLING

     

    THESE BARRELS ARE FOR REMINGTON BOLT ACTIONS (MDL700, MDL7, ETC) HOWEVER THEY USE A SAVAGE "STYLE" BARREL NUT SYSTEM FOR EASE OF INSTALLATION.  

    THE BARREL AND LOCK NUT ARE INCLUDED IN THE PACKAGE

     

    INSTALL INSTRUCTIONS

    MAKE SURE ALL MATING SURFACES ARE CLEAN ON ACTION FACE, RECOIL LUG, AND LOCK NUT

    LIGHTLY GREASE ALL MATING SURFACES

    REMOVE EJECTOR FROM BOLT FACE

    INSTALL BOLT INTO ACTION

    INSTALL GO GAUGE OR KNOWN GOOD CARTRIDGE IN BOLT FACE

    REMOVE THE LOCK NUT FROM THE BARREL AND APPLY A SMALL DROP OF BLUE NON PERMANENT LOC-TITE TO THREADS

    HAND TIGHTEN LOCK NUT ONTO BARREL TILL IT STOPS AND SLIDE RECOIL LUG ONTO BARREL

    TIGHTEN BARREL INTO ACTION GUIDING THE HEADSPACE GAUGE INTO THE CHAMBER

    WHEN THE BARREL IS SCREWED IN TILL THE POINT THAT IT IS HITTING ON THE GAGE - THIS IS MINIMUM HEADSPACE

    THE GRADUATED MARKS ON THE BARREL SHANK REPRESENT .0017 OF HEADSPACE ADJUSTMENT PER LINE

    BACK THE BARREL OFF APPROX ONE GRADUATED LINE TO GIVE PROPER CLEARANCE FOR HEADSPACE

    MORE OR LESS HEADSPACE ADJUSTMENT MAY BE REQUIRED DEPENDING ON YOUR APPLICATION

    TIGHTEN DOWN LOCK NUT WITH A FACTORY SAVAGE BARREL NUT WRENCH MAKING SURE THAT RECOIL LUG IS ALIGNED PROPERLY WITH AN ALIGNMENT TOOL OR SIMILAR

    THE NUT SHOULD BE TORQUED TO A MINIMUM OF 50 FOOT POUNDS

    TEST THE FIT OF BOTH GO AND NO-GAGES IN THE CHAMBER TO ASSURE PROPER HEADSPACE HAS BEEN SET

    Learn More
    $150.00
  25. SAVAGE BARREL NUT WRENCH SAVAGE BARREL NUT WRENCH

    SAVAGE BARREL NUT WRENCH

    WORKS WITH SAVAGE STYLE BARREL NUTS FOR KAK REMINGTON 700 BARRELS AND OTHERS Learn More
    $15.00
  26. BARREL BRACKET/RECOIL LUG BARREL BRACKET/RECOIL LUG

    BARREL BRACKET/RECOIL LUG

    WORKS WITH REMINGTON 700 BARRELS  Learn More
    $12.00

26 Item(s)

Grid  List 

Set Ascending Direction