KAK MULTI POSITION DIMPLE DRILL JIG
4140 THRU HARDENED STEEL
MAG PHOSPHATE FINISH
FOR USE WITH .750 DIAMETER BARRELS
DIMPLES BARRELS FOR GAS BLOCK SET SCREW SPACING OF
.500
.470
.450
.425
.400
INCLUDES
DRILL JIG
3/16 HSS 90 DEGREE SPOT DRILL
POINTED SET SCREW FOR ALIGNMENT
ALLEN WRENCH
- Tags:
- Category:
Reviews
-
Perfect
Machined perfectly. Have KVP jigs and the dimple hole that is supposed to be directly below the gas port isn't directly below the gas port. These jigs are perfect. Thank you KAK!
-
Dimpling made easy!
Dimpling barrels for use with set-screw-secured gas blocks is a good idea for a secure fit. This jig made it so easy and stress free. The set screw on the jig lines up with the gas port hole in the barrel and secures the jig in place. The bit fits nicely in the holes on the opposite side leaving a perfect dimple. I only made 1 dimple. The jig didn't have the right spacing for the aero precision gas block I was mounting, but I only want one dimple in the event I change gas blocks later. Buy this thing!
-
Dimple drill jig
This thing worked AMAZING! Pretty straight forward so as long as you have the correct sizing for your barrel type. You tighten the screw with your gas port and you drill on the opposite side of that. Took me about 4-5 tries because it was my first time ever doing this procedure and was scared to damage my barrel but got more confident by try 3. Just wanted make sure it was deep enough so that my screw can set into the dimple. Hell of a tool made the build a lot easier.
-
MULTI POSITION DIMPLE DRILL JIG
worked great.
-
Works like a charm
I have a dimple jig in .750, .875 and .936. All KAK. They all work fine. The jig is setup to work with different gas blocks that have different center to center dimensions on the mounting screws. I do not worry about that because I only use 1 dimple in my barrels. One is all you need but if you want 2 screws you can do it. That way I never have to worry about which gas block I buy and whether or not I have the right dimple jig to work with that specific block. One and done. You cant go wrong with these dimple jigs.
-
Did the Job
This was the first barrel I’ve used that wasn’t pre dimpled and I wasn’t quite sure which set of holes I needed to drill. But, KAK sent me an answer to my question as well as a video. No questions after that. It worked great.
-
Multi Position Dimple Jig
Excellent tool! takes the guesswork out of dimpling you new barrel or just replacing your gas block. Easy to use, and you end up with perfect results every time.
-
Great Tool!
This tool worked perfectly for me! As someone who is new to building an AR I was amazed at how simple this was to use. Great quality and did exactly what it's supposed to do.
-
It's good.
Does exactly what it's supposed to do; does it very well. Allows you to drill perfectly diametrically opposed to the gas port. Thanks to this tool, I found out the gas port on my barrel, not a KAK barrel, is drilled roughly 1 o'clock. just don't like the drill bit. Prefer 130 degree. 90 degrees goes too deep in the center for my peace of mind.