LR-308 CARBINE HEAVY BUFFER

SKU:
lr308-carbine-buffer-HEAVY
$55.00
(24 reviews)
Current Stock:
Adding to cart… The item has been added

AR10 CARBINE BUFFER

KAK PRODUCED 304 STAINLESS BODY

SOLID TUNGSTEN CORES

2.5 LONG

5 oz

FOR USE IN STANDARD AR15 CARBINE TUBES USING THE CORRECT AR10 CARBINE BUFFER SPRING

Reviews

  • 5
    Works great

    Posted by Buffer on August 18, 2021

    Works great

  • 5
    Great Quality

    Posted by Stephen on May 7, 2020

    This buffer was a perfect cure for bolt bounce with the recoil of the 450 Marlin Cartridge. The finish is so good looking I wish the tube was clear so you could see it in action.

  • 4
    Looks great, weight is right.

    Posted by Ted on July 29, 2019

    Based on my research my PSA PA-10 with the mil-spec 7" depth carbine receiver extension (buffer tube) needs a 2.5" buffer that's 5.1 to 5.3 ounces for optimum bolt/carrier speed. The 2.5" buffer that came with my PA-10 was only 3.8 ounces. Its body is aluminum and the two weights inside it are already tungsten. The issue is that to increase weight the buffer body needs to be made of steel in order to add that extra weight. The KAK buffer body is steel, and with its two tungsten weights inside, that's how it gets to 5.3 ounces. So this buffer, along with a Sprinco Orange extra power AR10 carbine recoil spring, gives me enough components to be able to fine tune the PA-10 for optimum reliability and recoil management.

  • 5
    Rapid fire must have!

    Posted by Joshua on February 24, 2019

    This buffer stops all ftf and fte period. Works perfectly as advertised.

  • 4
    Heavy buffer

    Posted by kenneth on January 18, 2019

    I’m a retired machinist the buffer is top notch machine work

  • 5
    LR Build

    Posted by Jim on October 10, 2018

    Needed to slow the rifle down a bit, this buffer did the trick. Thanks KAK!

  • 5
    Perfect for 10.5" Carbine Gas .308

    Posted by jerry on March 8, 2018

    Threw this in my 10.5" Carbine Gas .308. Runs great....good ejection pattern. Would recommend.

  • 5
    excellent buffer

    Posted by lone gunman on December 7, 2017

    this is an exceptional heavy buffer! as usual, KAK makes a quality product! if you need a heavy buffer for your AR10 308 build this is it. I used this in my aero based build with a sprinco orange spring and it cycles as it should and helped minimize the kick of my 308. I also used an adjustable gas block to help make this build a soft shooter and together they work great. I had a shoulder injury a few years ago and had to have my whole shoulder rebuilt and I can no longer take hard kicking rifles and with this combo, i can now enjoy shooting again.

  • 5
    Perfect

    Posted by Chino on October 13, 2017

    Great quality and price. Combine with Sprinco's orange 308 spring and no worries.