Cart:

0 item(s) - $0.00
You have no items in your shopping cart.

SHIPPING TIMES ARE 1-2 DAYS TO PROCESS

805-981-4734 M-F 9-3 PST   SALES@KAKINDUSTRY.COM

Flash Hiders & Muzzle Brakes

59 Item(s)

Grid  List 

Set Descending Direction
  1. 1/2-28 EXTENDED COMPENSATOR 1/2-28 EXTENDED COMPENSATOR

    1/2-28 EXTENDED COMPENSATOR

    1/2-28 EXTENDED COMPENSATOR

    EXTENDED TO GET 16 INCHES FROM A 14.5 BARREL 

    PRE DRILLED FOR PIN AND WELD 

    CRUSH WASHER NOT INCLUDED  Learn More
    $14.00
  2. KAK .578-28 MICRO FLASH CAN .45 ACP KAK .578-28 MICRO FLASH CAN .45 ACP

    KAK .578-28 MICRO FLASH CAN .45 ACP

    KAK INDUSTRY MICRO "SLIMLINE FLASH CAN"

    SIMILAR TO THE STANDARD "FLASH CAN" BUT SHORTER AND SMALLER DIAMETER TO FIT INSIDE SLIM RAIL SYSTEMS

    YOU GUYS ASKED FOR IT SO HERE IT IS

    THIS IS A SOLID 6061 ALUMINUM DEVICE THAT IS DESIGNED TO DIRECT MUZZLE GASES AND THE MUZZLE FLASH FORWARD

    THREADED .578 X 28 FOR 45 ACP CALIBER OR SIMILAR WEAPONS

    BLACK MILITARY TYPE HARD ANODIZING

    THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE

    THIS DEVICE IS DESIGNED TO DIRECT GASSES AND NOISE FORWARD AWAY FROM THE SHOOTER AND ENHANCE THE WEAPONS APPEARANCE

    A CRUSH WASHER CAN BE USED IS SPECIFIC TIMING IS DESIRED

    THIS DEVICE CAN WITHSTAND FULL AUTO HARD USE, NO BACK PRESSURE IS CREATED SO GAS CUTTING IS NOT A PROBLEM

    MANY END USERS HAVE REPORTED THOUSANDS OF ROUNDS DOWNRANGE WITH NO CHANGE OR EROSION

    1.200 DIA

    1.750 LONG

    6061 ALUMINUM

    BLACK HARD ANODIZED FINISH

    1.57    OZ.

    3/4 WRENCH FLATS

    THIS MUZZLE DEVICE WILL FIT INSIDE UTG PRO, AERO COP AND OTHER RAILS THAT WILL NOT CLEAR THE ORIGINAL LARGER VERSION

    Learn More
  3. KAK COMPENSATOR 1/2-36 KAK COMPENSATOR 1/2-36

    KAK COMPENSATOR 1/2-36

    1/2-36 FOR 9MM OR SIMILAR CLOSED END AND HOLES IN THE UPWARD POSITIONS ONLY SAME SIZE AS A2 Learn More
    $12.00
  4. KAK INDUSTRY M14 LH "SLIMLINE" EXTENDED FLASH CAN KAK INDUSTRY M14 LH "SLIMLINE" EXTENDED FLASH CAN

    KAK INDUSTRY M14 LH "SLIMLINE" EXTENDED FLASH CAN

    KAK INDUSTRY SLIM EXTENDED M14.0X1.0 LH "FLASH CAN".

     

    THIS IS A SOLID 6061 ALUMINUM DEVICE THAT IS DESIGNED TO DIRECT MUZZLE GASES AND THE MUZZLE FLASH FORWARD.

    THREADED M14.0X1.0LH FOR AK OR SIMILAR WEAPONS

    BLACK MILITARY TYPE HARD ANODIZING.

    THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE.

    THIS DEVICE IS DESIGNED TO DIRECT GASSES AND NOISE FORWARD AWAY FROM THE SHOOTER AND ENHANCE THE WEAPONS APPEARANCE..

    1.200 DIA

    5.00 LONG

    6061 ALUMINUM

    BLACK HARD ANODIZED FINISH

     5.98   OZ.

    3/4 WRENCH FLATS

    Learn More
  5. KAK INDUSTRY M13.5 LH "SLIMLINE" EXTENDED FLASH CAN KAK INDUSTRY M13.5 LH "SLIMLINE" EXTENDED FLASH CAN

    KAK INDUSTRY M13.5 LH "SLIMLINE" EXTENDED FLASH CAN

    KAK INDUSTRY SLIM EXTENDED M13.5X1.0 LH "FLASH CAN".


    THE BORE WILL ALLOW A 9MM TO PASS THROUGH

     

    THIS IS A SOLID 6061 ALUMINUM DEVICE THAT IS DESIGNED TO DIRECT MUZZLE GASES AND THE MUZZLE FLASH FORWARD.

    THREADED M13.5X1.0 LH FOR SIG MPX 9MM OR SIMILAR WEAPONS. BLACK MILITARY TYPE HARD ANODIZING.

    THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE.

    THIS DEVICE IS DESIGNED TO DIRECT GASSES AND NOISE FORWARD AWAY FROM THE SHOOTER AND ENHANCE THE WEAPONS APPEARANCE..

    1.200 DIA

    5.00 LONG

    6061 ALUMINUM

    BLACK HARD ANODIZED FINISH

     5.96   OZ.

    3/4 WRENCH FLATS

    Learn More
  6. KAK INDUSTRY SLIM EXTENDED 1/2-36 "FLASH CAN" KAK INDUSTRY SLIM EXTENDED 1/2-36 "FLASH CAN"

    KAK INDUSTRY SLIM EXTENDED 1/2-36 "FLASH CAN"

    KAK INDUSTRY SLIM EXTENDED 1/2-36 "FLASH CAN".


    THE BORE WILL ALLOW A 9MM TO PASS THROUGH

     

    THIS IS A SOLID 6061 ALUMINUM DEVICE THAT IS DESIGNED TO DIRECT MUZZLE GASES AND THE MUZZLE FLASH FORWARD.

    THREADED 1/2-36 FOR 9MM OR SIMILAR WEAPONS. BLACK MILITARY TYPE HARD ANODIZING.

    THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE.

    THIS DEVICE IS DESIGNED TO DIRECT GASSES AND NOISE FORWARD AWAY FROM THE SHOOTER AND ENHANCE THE WEAPONS APPEARANCE..

    1.200 DIA

    5.00 LONG

    6061 ALUMINUM

    BLACK HARD ANODIZED FINISH

     6.05   OZ.

    3/4 WRENCH FLATS

    Learn More
  7. KAK INDUSTRY SLIM EXTENDED 1/2-28 "FLASH CAN" KAK INDUSTRY SLIM EXTENDED 1/2-28 "FLASH CAN"

    KAK INDUSTRY SLIM EXTENDED 1/2-28 "FLASH CAN"

    KAK INDUSTRY SLIM EXTENDED 1/2-28 "FLASH CAN".


    THE BORE WILL ALLOW A 9MM TO PASS THROUGH

     

    THIS IS A SOLID 6061 ALUMINUM DEVICE THAT IS DESIGNED TO DIRECT MUZZLE GASES AND THE MUZZLE FLASH FORWARD.

    THREADED 1/2-28 FOR 5.56 OR SIMILAR WEAPONS. BLACK MILITARY TYPE HARD ANODIZING.

    THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE.

    THIS DEVICE IS DESIGNED TO DIRECT GASSES AND NOISE FORWARD AWAY FROM THE SHOOTER AND ENHANCE THE WEAPONS APPEARANCE..

    1.200 DIA

    5.00 LONG

    6061 ALUMINUM

    BLACK HARD ANODIZED FINISH

    6.12    OZ.

    3/4 WRENCH FLATS


    Learn More
  8. KAK INDUSTRY SLIM EXTENDED 5/8-24 "FLASH CAN" KAK INDUSTRY SLIM EXTENDED 5/8-24 "FLASH CAN"

    KAK INDUSTRY SLIM EXTENDED 5/8-24 "FLASH CAN"

    KAK INDUSTRY SLIM EXTENDED 5/8-24 "FLASH CAN".


    THE BORE WILL ALLOW A 45 CAL TO PASS THROUGH

     

    THIS IS A SOLID 6061 ALUMINUM DEVICE THAT IS DESIGNED TO DIRECT MUZZLE GASES AND THE MUZZLE FLASH FORWARD.

    THREADED 5/8-24 FOR BLK , 308 OR SIMILAR WEAPONS. BLACK MILITARY TYPE HARD ANODIZING.

    THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE.

    THIS DEVICE IS DESIGNED TO DIRECT GASSES AND NOISE FORWARD AWAY FROM THE SHOOTER AND ENHANCE THE WEAPONS APPEARANCE..

    1.200 DIA

    5.00 LONG

    6061 ALUMINUM

    BLACK HARD ANODIZED FINISH

     5.65   OZ.

    3/4 WRENCH FLATS


    Learn More
  9. KAK COMPENSATOR 1/2-28 KAK COMPENSATOR 1/2-28

    KAK COMPENSATOR 1/2-28

    1/2-28 FOR 556 OR SIMILAR CLOSED END AND HOLES IN THE UPWARD POSITIONS ONLY SAME SIZE AS A2

    CRUSH WASHER NOT INCLUDED  Learn More
    $12.00
  10. KAK COMPENSATOR 5/8-24 KAK COMPENSATOR 5/8-24

    KAK COMPENSATOR 5/8-24

    5/8-24 FOR 308 OR 300 BLK OR SIMILAR CLOSED END AND HOLES IN THE UPWARD POSITIONS ONLY SAME SIZE AS A2 Learn More
    $12.00
  11. KAK INDUSTRY MICRO M14.0X1.0LH "SLIMLINE FLASH CAN" KAK INDUSTRY MICRO M14.0X1.0LH "SLIMLINE FLASH CAN"

    KAK INDUSTRY MICRO M14.0X1.0LH "SLIMLINE FLASH CAN"

    KAK INDUSTRY "MICRO SLIMLINE FLASH CAN"

    SIMILAR TO THE STANDARD "FLASH CAN" BUT SHORTER AND SMALLER DIAMETER TO FIT INSIDE SLIM RAIL SYSTEMS

    YOU GUYS ASKED FOR IT SO HERE IT IS

    THIS IS A SOLID 6061 ALUMINUM DEVICE THAT IS DESIGNED TO DIRECT MUZZLE GASES AND THE MUZZLE FLASH FORWARD

    THREADED M14.0X1.0LH FOR AK OR SIMILAR WEAPONS

    BLACK MILITARY TYPE HARD ANODIZING

    THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE

    THIS DEVICE IS DESIGNED TO DIRECT GASSES AND NOISE FORWARD AWAY FROM THE SHOOTER AND ENHANCE THE WEAPONS APPEARANCE

    THIS DEVICE CAN WITHSTAND FULL AUTO HARD USE, NO BACK PRESSURE IS CREATED SO GAS CUTTING IS NOT A PROBLEM

    MANY END USERS HAVE REPORTED THOUSANDS OF ROUNDS DOWNRANGE WITH NO CHANGE OR EROSION

    1.200 DIA

    1.750 LONG

    6061 ALUMINUM

    BLACK HARD ANODIZED FINISH

    1.66  OZ.

    3/4 WRENCH FLATS

    THIS MUZZLE DEVICE WILL FIT INSIDE UTG PRO, AERO COP AND OTHER RAILS THAT WILL NOT CLEAR THE ORIGINAL LARGER VERSION

    Learn More
  12. KAK BLAST CONVERTER 5/8-24 - 458 CAL KAK BLAST CONVERTER 5/8-24 - 458 CAL

    KAK BLAST CONVERTER 5/8-24 - 458 CAL

    KAK INDUSTRY BLAST CONVERTER

    PATENTED DESIGN

    STEEL CONSTRUCTION

    HARDENED 

    MELONITE FINISHED

    SLEEVE SEALED WITH A PISTON RING FOR NO BLOWBACK

    1.350 DIAMETER

    1.750 LONG

    CRUSH WASHER IS INCLUDED

     

    MODES OF OPERATION

    1 - LINEAR COMP, GAS IS DIRECTED FORWARD AWAY FROM SHOOTER

    2 - HALF COMP, GAS IS DIRECTED UP AND AWAY FROM SHOOTER

    3 - FULL COMP, GAS IS DIRECTED OUTWARD 360 DEGREES GIVING MAX BRAKE 

     

    AVAILABLE IN A VARIETY OF THREAD PITCHES AND BORE SIZES, MADE SURE TO ORDER THE CORRECT ONE FOR YOUR APPLICATION

    Learn More
    $100.00
  13. KAK BLAST CONVERTER M14X1.0LH - 30 CAL KAK BLAST CONVERTER M14X1.0LH - 30 CAL

    KAK BLAST CONVERTER M14X1.0LH - 30 CAL

    KAK INDUSTRY BLAST CONVERTER

    PATENTED DESIGN

    STEEL CONSTRUCTION

    HARDENED 

    MELONITE FINISHED

    SLEEVE SEALED WITH A PISTON RING FOR NO BLOWBACK

    1.350 DIAMETER

    1.750 LONG

    CRUSH WASHER IS INCLUDED

     

    MODES OF OPERATION

    1 - LINEAR COMP, GAS IS DIRECTED FORWARD AWAY FROM SHOOTER

    2 - HALF COMP, GAS IS DIRECTED UP AND AWAY FROM SHOOTER

    3 - FULL COMP, GAS IS DIRECTED OUTWARD 360 DEGREES GIVING MAX BRAKE 

     

    AVAILABLE IN A VARIETY OF THREAD PITCHES AND BORE SIZES, MADE SURE TO ORDER THE CORRECT ONE FOR YOUR APPLICATION

    Learn More
    $100.00
  14. KAK INDUSTRY .578 X 28 "SLIMLINE FLASH CAN" KAK INDUSTRY .578 X 28 "SLIMLINE FLASH CAN"

    KAK INDUSTRY .578 X 28 "SLIMLINE FLASH CAN"

    KAK INDUSTRY "SLIMLINE FLASH CAN"

    SIMILAR TO THE STANDARD "FLASH CAN" BUT SMALLER DIAMETER TO FIT INSIDE SLIM RAIL SYSTEMS

    YOU GUYS ASKED FOR IT SO HERE IT IS

    THIS IS A SOLID 6061 ALUMINUM DEVICE THAT IS DESIGNED TO DIRECT MUZZLE GASES AND THE MUZZLE FLASH FORWARD

    THREADED .578 X 28 FOR 45 ACP CALIBER OR SIMILAR WEAPONS

    BLACK MILITARY TYPE HARD ANODIZING

    THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE

    THIS DEVICE IS DESIGNED TO DIRECT GASSES AND NOISE FORWARD AWAY FROM THE SHOOTER AND ENHANCE THE WEAPONS APPEARANCE

    A CRUSH WASHER CAN BE USED IS SPECIFIC TIMING IS DESIRED

    THIS DEVICE CAN WITHSTAND FULL AUTO HARD USE, NO BACK PRESSURE IS CREATED SO GAS CUTTING IS NOT A PROBLEM

    MANY END USERS HAVE REPORTED THOUSANDS OF ROUNDS DOWNRANGE WITH NO CHANGE OR EROSION

    1.200 DIA

    3.250 LONG

    6061 ALUMINUM

    BLACK HARD ANODIZED FINISH

    3.24 OZ.

    3/4 WRENCH FLATS

    THIS MUZZLE DEVICE WILL FIT INSIDE UTG PRO, AERO COP AND OTHER RAILS THAT WILL NOT CLEAR THE ORIGINAL LARGER VERSION

    Learn More
  15. SLANT AK-47 MUZZLE BRAKE SLANT AK-47 MUZZLE BRAKE

    SLANT AK-47 MUZZLE BRAKE

    AK SLANT BRAKE M14x1.0 LH

    CLASSIC SLANT BRAKE STYLE MUZZLE DEVICE FOR AK OR SIMILAR PLATFORMS.

    COUNTS FOR 922R COMPLIANCE. Learn More
    $9.50
  16. 9/16 CRUSH WASHER 9/16 CRUSH WASHER

    9/16 CRUSH WASHER

    9/16" CRUSH WASHER

    FOR YOU USE WITH 9/16-28 AND .578X28 MUZZLE DEVICES

    ( 40 CAL OR 45 ACP)
    Learn More
    $4.50
  17. 5/8-24 EXTENDED COMENSATOR 30 CAL 5/8-24 EXTENDED COMENSATOR 30 CAL

    5/8-24 EXTENDED COMENSATOR 30 CAL

    5/8-24 COMPENSATOR EXTENDED 

    EXTENDED TO GET 16 INCHES FROM A 14.5 BARREL 

    PRE DRILLED FOR PIN AND WELD 

    CRUSH WASHER NOT INCLUDED  Learn More
    $14.00
  18. 1/2-28 A2 EXTENDED FLASH HIDER 1/2-28 A2 EXTENDED FLASH HIDER

    1/2-28 A2 EXTENDED FLASH HIDER

    A2 BIRDCAGE 1/2-28 EXTENDED 

    EXTENDED TO GET 16 INCHES FROM A 14.5 BARREL 

    PRE DRILLED FOR PIN AND WELD 

    CRUSH WASHER NOT INCLUDED  Learn More
    $14.00
  19. 5/8-24 EXTENDED A2 FLASH HIDER 5/8-24 EXTENDED A2 FLASH HIDER

    5/8-24 EXTENDED A2 FLASH HIDER

    A2 BIRDCAGE 5/8-24 FOR 308 OR 300 BLK OR SIMILAR

    EXTENDED TO GET 16 INCHES FROM A 14.5 BARREL 

    PRE DRILLED FOR PIN AND WELD 

    CRUSH WASHER NOT INCLUDED  Learn More
    $14.00
  20. KAK INDUSTRY MICRO 1/2-28 FLUTED  "SLIMLINE FLASH CAN" KAK INDUSTRY MICRO 1/2-28 FLUTED  "SLIMLINE FLASH CAN"

    KAK INDUSTRY MICRO 1/2-28 FLUTED "SLIMLINE FLASH CAN"

    KAK INDUSTRY MICRO "SLIMLINE FLASH CAN"

     

    THE BORE WILL ALLOW A 9MM TO PASS THROUGH

     

    SIMILAR TO THE STANDARD "FLASH CAN" BUT SHORTER AND SMALLER DIAMETER TO FIT INSIDE SLIM RAIL SYSTEMS

    YOU GUYS ASKED FOR IT SO HERE IT IS

    THIS IS A SOLID 6061 ALUMINUM DEVICE THAT IS DESIGNED TO DIRECT MUZZLE GASES AND THE MUZZLE FLASH FORWARD

    THREADED 1/2-28 FOR 5.56 OR SIMILAR WEAPONS

    BLACK MILITARY TYPE HARD ANODIZING

    THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE

    THIS DEVICE IS DESIGNED TO DIRECT GASSES AND NOISE FORWARD AWAY FROM THE SHOOTER AND ENHANCE THE WEAPONS APPEARANCE

    THIS DEVICE CAN WITHSTAND FULL AUTO HARD USE, NO BACK PRESSURE IS CREATED SO GAS CUTTING IS NOT A PROBLEM

    MANY END USERS HAVE REPORTED THOUSANDS OF ROUNDS DOWNRANGE WITH NO CHANGE OR EROSION

    1.200 DIA

    1.75 LONG

    6061 ALUMINUM

    BLACK HARD ANODIZED FINISH

    1.7    OZ.

    3/4 WRENCH FLATS

    THIS MUZZLE DEVICE WILL FIT INSIDE UTG PRO, AERO COP AND OTHER RAILS THAT WILL NOT CLEAR THE ORIGINAL LARGER VERSION

    Learn More
    $26.00
  21. KAK-1/2-28-FLUTED-SLIMLINE-FLASH-CAN KAK-1/2-28-FLUTED-SLIMLINE-FLASH-CAN

    KAK-1/2-28-FLUTED-SLIMLINE-FLASH-CAN

    KAK INDUSTRY 1/2-28 FLUTED SLIMLINE FLASH CAN 

    LIMITED RUN !!

    THE BORE WILL ALLOW A 9MM TO PASS THROUGH

    SIMILAR TO THE STANDARD "FLASH CAN" BUT SMALLER DIAMETER TO FIT INSIDE SLIM RAIL SYSTEMS

    YOU GUYS ASKED FOR IT SO HERE IT IS

    THIS IS A SOLID 6061 ALUMINUM DEVICE THAT IS DESIGNED TO DIRECT MUZZLE GASES AND THE MUZZLE FLASH FORWARD

    THREADED 1/2-28 FOR 5.56 OR SIMILAR WEAPONS

    BLACK MILITARY TYPE HARD ANODIZING

    THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE

    THIS DEVICE IS DESIGNED TO DIRECT GASSES AND NOISE FORWARD AWAY FROM THE SHOOTER AND ENHANCE THE WEAPONS APPEARANCE

    THIS DEVICE CAN WITHSTAND FULL AUTO HARD USE, NO BACK PRESSURE IS CREATED SO GAS CUTTING IS NOT A PROBLEM

    MANY END USERS HAVE REPORTED THOUSANDS OF ROUNDS DOWNRANGE WITH NO CHANGE OR EROSION

    1.200 DIA

    3.250 LONG

    6061 ALUMINUM

    BLACK HARD ANODIZED FINISH

    3.42 OZ.

    3/4 WRENCH FLATS

     

    THIS MUZZLE DEVICE WILL FIT INSIDE UTG PRO, AERO COP AND OTHER RAILS THAT WILL NOT CLEAR THE ORIGINAL LARGER VERSION

    Learn More
    $29.99
  22. 1/2-28 9MM  COMPENSATOR  (9MM BORE) 1/2-28 9MM  COMPENSATOR  (9MM BORE)

    1/2-28 9MM COMPENSATOR (9MM BORE)

    1/2-28 FOR 9MM OR SIMILAR CLOSED END AND HOLES IN THE UPWARD POSITIONS ONLY SAME SIZE AS A2 Learn More
    $12.00
  23. 5/8"-CRUSH-WASHER-SS 5/8"-CRUSH-WASHER-SS

    5/8"-CRUSH-WASHER-SS

    5/8" CRUSH WASHER
    FOR YOU USE WITH 5/8-24 MUZZLE DEVICES
    (.308 OR 7.62 NATO OR BLACKOUT) Learn More
  24. 1/2"-CRUSH-WASHER-STAINLESS 1/2"-CRUSH-WASHER-STAINLESS

    1/2"-CRUSH-WASHER-STAINLESS

    1/2" CRUSH WASHER FOR YOU USE WITH 1/2-28 AND 1/2-36 MUZZLE DEVICES (5.56 / .223 OR SIMILAR) Learn More
  25. KAK COMPENSATOR 5/8-24 FOR .458 CAL KAK COMPENSATOR 5/8-24 FOR .458 CAL

    KAK COMPENSATOR 5/8-24 FOR .458 CAL

    5/8-24 THREAD WITH 1/2 INCH HOLE

    FOR 45 ACP, 450 MARLIN, .458 OR SIMILAR Learn More
    $15.00
  26. A2 BIRDCAGE 5/8-24 FOR 458 CAL A2 BIRDCAGE 5/8-24 FOR 458 CAL

    A2 BIRDCAGE 5/8-24 FOR 458 CAL

    A2 BIRDCAGE 
    5/8-24 THREAD WITH 1/2 INCH HOLE

    FOR 45 ACP, 450 MARLIN, .458 OR SIMILAR


    CRUSH WASHER NOT INCLUDED  Learn More
    $12.00
  27. KAK COMPENSATOR 9/16-24 FOR 40 CAL KAK COMPENSATOR 9/16-24 FOR 40 CAL

    KAK COMPENSATOR 9/16-24 FOR 40 CAL

    9/16 x 24
    FOR 40 CAL
    CLOSED END AND HOLES IN THE UPWARD POSITIONS ONLY
    SAME SIZE AS A2 BIRDCAGE Learn More
    $15.00
  28. KAK COMPENSATOR .578-28 FOR 45ACP KAK COMPENSATOR .578-28 FOR 45ACP

    KAK COMPENSATOR .578-28 FOR 45ACP

    .578-28
    FOR 45ACP
    CLOSED END AND HOLES IN THE UPWARD POSITIONS ONLY
    SAME SIZE AS A2 Learn More
    $15.00
  29. KAK BLAST CONVERTER M13.5X1.0LH - 9MM KAK BLAST CONVERTER M13.5X1.0LH - 9MM

    KAK BLAST CONVERTER M13.5X1.0LH - 9MM

    KAK INDUSTRY BLAST CONVERTER

    PATENTED DESIGN

    STEEL CONSTRUCTION

    HARDENED 

    MELONITE FINISHED

    SLEEVE SEALED WITH A PISTON RING FOR NO BLOWBACK

    1.350 DIAMETER

    1.750 LONG

    CRUSH WASHER IS INCLUDED

     

    MODES OF OPERATION

    1 - LINEAR COMP, GAS IS DIRECTED FORWARD AWAY FROM SHOOTER

    2 - HALF COMP, GAS IS DIRECTED UP AND AWAY FROM SHOOTER

    3 - FULL COMP, GAS IS DIRECTED OUTWARD 360 DEGREES GIVING MAX BRAKE 

     

    AVAILABLE IN A VARIETY OF THREAD PITCHES AND BORE SIZES, MADE SURE TO ORDER THE CORRECT ONE FOR YOUR APPLICATION

    Learn More
    $100.00
  30. KAK BLAST CONVERTER 5/8-24 - 30 CAL KAK BLAST CONVERTER 5/8-24 - 30 CAL

    KAK BLAST CONVERTER 5/8-24 - 30 CAL

    KAK INDUSTRY BLAST CONVERTER

    FOR BARRELS 10.5 AND LONGER

    PATENTED DESIGN

    STEEL CONSTRUCTION

    HARDENED 

    MELONITE FINISHED

    SLEEVE SEALED WITH A PISTON RING FOR NO BLOWBACK

    1.350 DIAMETER

    1.750 LONG

    CRUSH WASHER IS INCLUDED

     

    MODES OF OPERATION

    1 - LINEAR COMP, GAS IS DIRECTED FORWARD AWAY FROM SHOOTER

    2 - HALF COMP, GAS IS DIRECTED UP AND AWAY FROM SHOOTER

    3 - FULL COMP, GAS IS DIRECTED OUTWARD 360 DEGREES GIVING MAX BRAKE 

     

    AVAILABLE IN A VARIETY OF THREAD PITCHES AND BORE SIZES, MADE SURE TO ORDER THE CORRECT ONE FOR YOUR APPLICATION

    Learn More
    $100.00
  31. KAK BLAST CONVERTER 1/2-36 - 9MM KAK BLAST CONVERTER 1/2-36 - 9MM

    KAK BLAST CONVERTER 1/2-36 - 9MM

    KAK INDUSTRY BLAST CONVERTER

    PATENTED DESIGN

    STEEL CONSTRUCTION

    HARDENED 

    MELONITE FINISHED

    SLEEVE SEALED WITH A PISTON RING FOR NO BLOWBACK

    1.350 DIAMETER

    1.750 LONG

    CRUSH WASHER IS INCLUDED

     

    MODES OF OPERATION

    1 - LINEAR COMP, GAS IS DIRECTED FORWARD AWAY FROM SHOOTER

    2 - HALF COMP, GAS IS DIRECTED UP AND AWAY FROM SHOOTER

    3 - FULL COMP, GAS IS DIRECTED OUTWARD 360 DEGREES GIVING MAX BRAKE 

     

    AVAILABLE IN A VARIETY OF THREAD PITCHES AND BORE SIZES, MADE SURE TO ORDER THE CORRECT ONE FOR YOUR APPLICATION

    Learn More
    $100.00
  32. KAK MODIFIED FOR 458 SOCOM 5/8-24 HARDENED FLASH HIDER KAK MODIFIED FOR 458 SOCOM 5/8-24 HARDENED FLASH HIDER

    KAK MODIFIED FOR 458 SOCOM 5/8-24 HARDENED FLASH HIDER

    KAK INDUSTRY 5/8-24 FLASH HIDER MODIFIED FOR SOCOM

    HARDENED 4140 STEEL

    VERY TOUGH

    MEASURES 2.25 LONG

    BORE MODIFIED FOR SOCOM USE

    COMPACT UNIT COMPARED TO OTHERS

    MILITARY MANGANESE PHOSPHATE FINISH

    4 PORT DESIGN

    NO CRUSH WASHER INCLUDED

    Learn More

    $46.00
  33. A2 BIRDCAGE  1/2-36 A2 BIRDCAGE  1/2-36

    A2 BIRDCAGE 1/2-36

    A2 BIRDCAGE 1/2-36 FOR 9MM OR SIMILAR Learn More
    $15.00
  34. KAK INDUSTRY 1/2-36 "SLIMLINE FLASH CAN" 9MM KAK INDUSTRY 1/2-36 "SLIMLINE FLASH CAN" 9MM

    KAK INDUSTRY 1/2-36 "SLIMLINE FLASH CAN" 9MM

    KAK INDUSTRY "SLIMLINE FLASH CAN"

    SIMILAR TO THE STANDARD "FLASH CAN" BUT SMALLER DIAMETER TO FIT INSIDE SLIM RAIL SYSTEMS

    YOU GUYS ASKED FOR IT SO HERE IT IS

    THIS IS A SOLID 6061 ALUMINUM DEVICE THAT IS DESIGNED TO DIRECT MUZZLE GASES AND THE MUZZLE FLASH FORWARD

    THREADED 1/2-36 FOR 9MM OR SIMILAR WEAPONS

    BLACK MILITARY TYPE HARD ANODIZING

    THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE

    THIS DEVICE IS DESIGNED TO DIRECT GASSES AND NOISE FORWARD AWAY FROM THE SHOOTER AND ENHANCE THE WEAPONS APPEARANCE

    THIS DEVICE CAN WITHSTAND FULL AUTO HARD USE, NO BACK PRESSURE IS CREATED SO GAS CUTTING IS NOT A PROBLEM

    MANY END USERS HAVE REPORTED THOUSANDS OF ROUNDS DOWNRANGE WITH NO CHANGE OR EROSION

    1.200 DIA

    3.250 LONG

    6061 ALUMINUM

    BLACK HARD ANODIZED FINISH

    3.37 OZ.

    3/4 WRENCH FLATS

    THIS MUZZLE DEVICE WILL FIT INSIDE UTG PRO, AERO COP AND OTHER RAILS THAT WILL NOT CLEAR THE ORIGINAL LARGER VERSION

    Learn More
  35. KAK INDUSTRY 1/2-36 "FLASH CAN" 9MM KAK INDUSTRY 1/2-36 "FLASH CAN" 9MM

    KAK INDUSTRY 1/2-36 "FLASH CAN" 9MM

    KAK INDUSTRY "FLASH CAN". 
    THIS IS A SOLID 6061 ALUMINUM DEVICE THAT IS DESIGNED TO DIRECT MUZZLE GASES AND THE MUZZLE FLASH FORWARD. 

    THREADED 1/2-36 FOR 9MM OR SIMILAR WEAPONS. BLACK MILITARY TYPE HARD ANODIZING. 

     THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE. THIS DEVICE IS DESIGNED TO DIRECT GASSES AND NOISE FORWARD AWAY FROM THE SHOOTER AND ENHANCE THE WEAPONS APPEARANCE.. 

    1.360 DIA 3.250 LONG 

    6061 ALUMINUM BLACK HARD ANODIZED FINISH 

     4.14 OZ.
     
     3/4 WRENCH FLATS Learn More
  36. 5/8" CRUSH WASHER 5/8" CRUSH WASHER

    5/8" CRUSH WASHER

    5/8" CRUSH WASHER FOR YOU USE WITH 5/8-24 MUZZLE DEVICES (.308 OR 7.62 NATO OR BLACKOUT) Learn More
    $4.50
  37. A2 BIRDCAGE  1/2-28 A2 BIRDCAGE  1/2-28

    A2 BIRDCAGE 1/2-28

    A2 BIRDCAGE 1/2-28

    CRUSH WASHER NOT INCLUDED  Learn More
    $7.00
  38. KAK INDUSTRY M14X1.0 LH "FLASH CAN" KAK INDUSTRY M14X1.0 LH "FLASH CAN"

    KAK INDUSTRY M14X1.0 LH "FLASH CAN"

    KAK INDUSTRY "FLASH CAN". 

     THIS IS A SOLID 6061 ALUMINUM DEVICE THAT IS DESIGNED TO DIRECT MUZZLE GASES AND THE MUZZLE FLASH FORWARD. 

     THREADED METRIC M14X1.0 LEFT HAND FOR 30 CALIBER OR SIMILAR WEAPONS. 
     BLACK MILITARY TYPE HARD ANODIZING. 

     THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE. THIS DEVICE IS DESIGNED TO DIRECT GASSES AND NOISE FORWARD AWAY FROM THE SHOOTER AND ENHANCE THE WEAPONS APPEARANCE.. 

     1.360 DIA 3.250 LONG 
     6061 ALUMINUM BLACK HARD ANODIZED FINISH 
     4.06 OZ. 
     3/4 WRENCH FLATS Learn More
  39. KAK INDUSTRY 5/8-24 "SLIMLINE FLASH CAN" KAK INDUSTRY 5/8-24 "SLIMLINE FLASH CAN"

    KAK INDUSTRY 5/8-24 "SLIMLINE FLASH CAN"

    KAK INDUSTRY "SLIMLINE FLASH CAN"

    SIMILAR TO THE STANDARD "FLASH CAN" BUT SMALLER DIAMETER TO FIT INSIDE SLIM RAIL SYSTEMS

    YOU GUYS ASKED FOR IT SO HERE IT IS

    THIS IS A SOLID 6061 ALUMINUM DEVICE THAT IS DESIGNED TO DIRECT MUZZLE GASES AND THE MUZZLE FLASH FORWARD

    THREADED 5/8-24 FOR 30 CALIBER OR SIMILAR WEAPONS

    BLACK MILITARY TYPE HARD ANODIZING

    THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE

    THIS DEVICE IS DESIGNED TO DIRECT GASSES AND NOISE FORWARD AWAY FROM THE SHOOTER AND ENHANCE THE WEAPONS APPEARANCE

    THIS DEVICE CAN WITHSTAND FULL AUTO HARD USE, NO BACK PRESSURE IS CREATED SO GAS CUTTING IS NOT A PROBLEM

    MANY END USERS HAVE REPORTED THOUSANDS OF ROUNDS DOWNRANGE WITH NO CHANGE OR EROSION

    1.200 DIA

    3.250 LONG

    6061 ALUMINUM

    BLACK HARD ANODIZED FINISH

    3.19 OZ.

    3/4 WRENCH FLATS


    THIS MUZZLE DEVICE WILL FIT INSIDE UTG PRO, AERO COP AND OTHER RAILS THAT WILL NOT CLEAR THE ORIGINAL LARGER VERSION

    Learn More
  40. KAK INDUSTRY 1/2-28 "SLIMLINE FLASH CAN" KAK INDUSTRY 1/2-28 "SLIMLINE FLASH CAN"

    KAK INDUSTRY 1/2-28 "SLIMLINE FLASH CAN"

    KAK INDUSTRY "SLIMLINE FLASH CAN"

    THE BORE WILL ALLOW A 9MM TO PASS THROUGH

    SIMILAR TO THE STANDARD "FLASH CAN" BUT SMALLER DIAMETER TO FIT INSIDE SLIM RAIL SYSTEMS

    YOU GUYS ASKED FOR IT SO HERE IT IS

    THIS IS A SOLID 6061 ALUMINUM DEVICE THAT IS DESIGNED TO DIRECT MUZZLE GASES AND THE MUZZLE FLASH FORWARD

    THREADED 1/2-28 FOR 5.56 OR SIMILAR WEAPONS

    BLACK MILITARY TYPE HARD ANODIZING

    THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE

    THIS DEVICE IS DESIGNED TO DIRECT GASSES AND NOISE FORWARD AWAY FROM THE SHOOTER AND ENHANCE THE WEAPONS APPEARANCE

    A CRUSH WASHER CAN BE USED IS SPECIFIC TIMING IS DESIRED

    THIS DEVICE CAN WITHSTAND FULL AUTO HARD USE, NO BACK PRESSURE IS CREATED SO GAS CUTTING IS NOT A PROBLEM

    MANY END USERS HAVE REPORTED THOUSANDS OF ROUNDS DOWNRANGE WITH NO CHANGE OR EROSION

    1.200 DIA

    3.250 LONG

    6061 ALUMINUM

    BLACK HARD ANODIZED FINISH

    3.42 OZ.

    3/4 WRENCH FLATS

     

    THIS MUZZLE DEVICE WILL FIT INSIDE UTG PRO, AERO COP AND OTHER RAILS THAT WILL NOT CLEAR THE ORIGINAL LARGER VERSION

    Learn More
  41. 1/2" CRUSH WASHER 1/2" CRUSH WASHER

    1/2" CRUSH WASHER

    1/2" CRUSH WASHER FOR YOU USE WITH 1/2-28 AND 1/2-36 MUZZLE DEVICES (5.56 / .223 OR SIMILAR) Learn More
  42. KAK INDUSTRY 5/8-24 "FLASH CAN" KAK INDUSTRY 5/8-24 "FLASH CAN"

    KAK INDUSTRY 5/8-24 "FLASH CAN"

    KAK INDUSTRY "FLASH CAN". 

    THIS IS A SOLID 6061 ALUMINUM DEVICE THAT IS DESIGNED TO DIRECT MUZZLE GASES AND THE MUZZLE FLASH FORWARD. 
    THREADED 5/8-24 FOR 30 CALIBER OR SIMILAR WEAPONS. 
    BLACK MILITARY TYPE HARD ANODIZING. 

     THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE. THIS DEVICE IS DESIGNED TO DIRECT GASSES AND NOISE FORWARD AWAY FROM THE SHOOTER AND ENHANCE THE WEAPONS APPEARANCE.. 

    1.360 DIA 3.250 LONG
    6061 ALUMINUM BLACK HARD ANODIZED FINISH 
    4.02 OZ. 
    3/4 WRENCH FLATS Learn More
  43. KAK 5/8-24 308 HARDENED FLASH HIDER KAK 5/8-24 308 HARDENED FLASH HIDER

    KAK 5/8-24 308 HARDENED FLASH HIDER

    KAK INDUSTRY 5/8-24 FLASH HIDER

    HARDENED 4140 STEEL

    VERY TOUGH

    MEASURES 2.25 LONG

    GREAT FOR AR-15 BLACKOUT BUILDS AS WELL AS LR-308 BUILDS

    COMPACT UNIT COMPARED TO OTHERS

    MILITARY MANGANESE PHOSPHATE FINISH

    4 PORT DESIGN

    NO CRUSH WASHER INCLUDED

    THIS FLASH HIDER ALSO WORKS WITH OUR 7.62X39 BARRELS AND CAN BE OPENED UP FOR BIG BORE APPLICATIONS, CALL FOR DETAILS Learn More

  44. KAK INDUSTRY  M14X1.0 LH  "SLIMLINE FLASH CAN" KAK INDUSTRY  M14X1.0 LH  "SLIMLINE FLASH CAN"

    KAK INDUSTRY M14X1.0 LH "SLIMLINE FLASH CAN"

    KAK INDUSTRY "SLIMLINE FLASH CAN"

    SIMILAR TO THE STANDARD "FLASH CAN" BUT SMALLER DIAMETER TO FIT INSIDE SLIM RAIL SYSTEMS

    YOU GUYS ASKED FOR IT SO HERE IT IS

    THIS IS A SOLID 6061 ALUMINUM DEVICE THAT IS DESIGNED TO DIRECT MUZZLE GASES AND THE MUZZLE FLASH FORWARD

    THREADED M14X1.0 LH

    BLACK MILITARY TYPE HARD ANODIZING

    THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE

    THIS DEVICE IS DESIGNED TO DIRECT GASSES AND NOISE FORWARD AWAY FROM THE SHOOTER AND ENHANCE THE WEAPONS APPEARANCE

    A CRUSH WASHER CAN BE USED IS SPECIFIC TIMING IS DESIRED

    THIS DEVICE CAN WITHSTAND FULL AUTO HARD USE, NO BACK PRESSURE IS CREATED SO GAS CUTTING IS NOT A PROBLEM

    MANY END USERS HAVE REPORTED THOUSANDS OF ROUNDS DOWNRANGE WITH NO CHANGE OR EROSION

    1.200 DIA

    3.250 LONG

    6061 ALUMINUM

    BLACK HARD ANODIZED FINISH

    3.2 OZ.

    3/4 WRENCH FLATS

    THIS MUZZLE DEVICE WILL FIT INSIDE UTG PRO, AERO COP AND OTHER RAILS THAT WILL NOT CLEAR THE ORIGINAL LARGER VERSION

    Learn More

    Regular Price: $35.00

    Special Price: $20.00

    As low as: $15.00
  45. KAK INDUSTRY MICRO 1/2-36 "SLIMLINE FLASH CAN" 9MM KAK INDUSTRY MICRO 1/2-36 "SLIMLINE FLASH CAN" 9MM

    KAK INDUSTRY MICRO 1/2-36 "SLIMLINE FLASH CAN" 9MM

    KAK INDUSTRY "MICRO SLIMLINE FLASH CAN"

    SIMILAR TO THE STANDARD "FLASH CAN" BUT SHORTER AND SMALLER DIAMETER TO FIT INSIDE SLIM RAIL SYSTEMS

    YOU GUYS ASKED FOR IT SO HERE IT IS

    THIS IS A SOLID 6061 ALUMINUM DEVICE THAT IS DESIGNED TO DIRECT MUZZLE GASES AND THE MUZZLE FLASH FORWARD

    THREADED 1/2-36 FOR 9MM OR SIMILAR WEAPONS

    BLACK MILITARY TYPE HARD ANODIZING

    THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE

    THIS DEVICE IS DESIGNED TO DIRECT GASSES AND NOISE FORWARD AWAY FROM THE SHOOTER AND ENHANCE THE WEAPONS APPEARANCE

    THIS DEVICE CAN WITHSTAND FULL AUTO HARD USE, NO BACK PRESSURE IS CREATED SO GAS CUTTING IS NOT A PROBLEM

    MANY END USERS HAVE REPORTED THOUSANDS OF ROUNDS DOWNRANGE WITH NO CHANGE OR EROSION

    1.200 DIA

    1.750 LONG

    6061 ALUMINUM

    BLACK HARD ANODIZED FINISH

    1.71    OZ.

    3/4 WRENCH FLATS

    THIS MUZZLE DEVICE WILL FIT INSIDE UTG PRO, AERO COP AND OTHER RAILS THAT WILL NOT CLEAR THE ORIGINAL LARGER VERSION

    Learn More
  46. KAK INDUSTRY MICRO 1/2-28 "SLIMLINE FLASH CAN" KAK INDUSTRY MICRO 1/2-28 "SLIMLINE FLASH CAN"

    KAK INDUSTRY MICRO 1/2-28 "SLIMLINE FLASH CAN"

    KAK INDUSTRY MICRO "SLIMLINE FLASH CAN"

     

    THE BORE WILL ALLOW A 9MM TO PASS THROUGH

     

    SIMILAR TO THE STANDARD "FLASH CAN" BUT SHORTER AND SMALLER DIAMETER TO FIT INSIDE SLIM RAIL SYSTEMS

    YOU GUYS ASKED FOR IT SO HERE IT IS

    THIS IS A SOLID 6061 ALUMINUM DEVICE THAT IS DESIGNED TO DIRECT MUZZLE GASES AND THE MUZZLE FLASH FORWARD

    THREADED 1/2-28 FOR 5.56 OR SIMILAR WEAPONS

    BLACK MILITARY TYPE HARD ANODIZING

    THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE

    THIS DEVICE IS DESIGNED TO DIRECT GASSES AND NOISE FORWARD AWAY FROM THE SHOOTER AND ENHANCE THE WEAPONS APPEARANCE

    THIS DEVICE CAN WITHSTAND FULL AUTO HARD USE, NO BACK PRESSURE IS CREATED SO GAS CUTTING IS NOT A PROBLEM

    MANY END USERS HAVE REPORTED THOUSANDS OF ROUNDS DOWNRANGE WITH NO CHANGE OR EROSION

    1.200 DIA

    1.75 LONG

    6061 ALUMINUM

    BLACK HARD ANODIZED FINISH

    1.7    OZ.

    3/4 WRENCH FLATS


    THIS MUZZLE DEVICE WILL FIT INSIDE UTG PRO, AERO COP AND OTHER RAILS THAT WILL NOT CLEAR THE ORIGINAL LARGER VERSION

    Learn More
  47. KAK BLAST CONVERTER 1/2-28 - 9MM KAK BLAST CONVERTER 1/2-28 - 9MM

    KAK BLAST CONVERTER 1/2-28 - 9MM

    KAK INDUSTRY BLAST CONVERTER

    PATENTED DESIGN

    STEEL CONSTRUCTION

    HARDENED 

    MELONITE FINISHED

    SLEEVE SEALED WITH A PISTON RING FOR NO BLOWBACK

    1.350 DIAMETER

    1.750 LONG

    CRUSH WASHER IS INCLUDED

     

    MODES OF OPERATION

    1 - LINEAR COMP, GAS IS DIRECTED FORWARD AWAY FROM SHOOTER

    2 - HALF COMP, GAS IS DIRECTED UP AND AWAY FROM SHOOTER

    3 - FULL COMP, GAS IS DIRECTED OUTWARD 360 DEGREES GIVING MAX BRAKE 

     

    AVAILABLE IN A VARIETY OF THREAD PITCHES AND BORE SIZES, MADE SURE TO ORDER THE CORRECT ONE FOR YOUR APPLICATION

    Learn More
    $100.00
  48. KAK BLAST CONVERTER 1/2-28 - 556 KAK BLAST CONVERTER 1/2-28 - 556

    KAK BLAST CONVERTER 1/2-28 - 556

    KAK INDUSTRY BLAST CONVERTER

    FOR BARRELS 10.5 AND LONGER

    PATENTED DESIGN

    STEEL CONSTRUCTION

    HARDENED 

    MELONITE FINISHED

    SLEEVE SEALED WITH A PISTON RING FOR NO BLOWBACK

    1.350 DIAMETER

    1.750 LONG

    CRUSH WASHER IS INCLUDED

     

    MODES OF OPERATION

    1 - LINEAR COMP, GAS IS DIRECTED FORWARD AWAY FROM SHOOTER

    2 - HALF COMP, GAS IS DIRECTED UP AND AWAY FROM SHOOTER

    3 - FULL COMP, GAS IS DIRECTED OUTWARD 360 DEGREES GIVING MAX BRAKE 

     

    AVAILABLE IN A VARIETY OF THREAD PITCHES AND BORE SIZES, MADE SURE TO ORDER THE CORRECT ONE FOR YOUR APPLICATION

    Learn More
    $100.00
  49. A2 BIRDCAGE STAINLESS 5/8-24 A2 BIRDCAGE STAINLESS 5/8-24

    A2 BIRDCAGE STAINLESS 5/8-24

    A2 BIRDCAGE 5/8-24 STAINLESS STEEL

    CRUSH WASHER NOT INCLUDED  Learn More
  50. A2 BIRDCAGE STAINLESS 1/2-36 A2 BIRDCAGE STAINLESS 1/2-36
  51. A2 BIRDCAGE STAINLESS 1/2-28 A2 BIRDCAGE STAINLESS 1/2-28

    A2 BIRDCAGE STAINLESS 1/2-28

    A2 BIRDCAGE 1/2-28 STAINLESS STEEL Learn More
  52. KAK INDUSTRY EXTENDED M13.5X1.0 LH "FLASH CAN" KAK INDUSTRY EXTENDED M13.5X1.0 LH "FLASH CAN"

    KAK INDUSTRY EXTENDED M13.5X1.0 LH "FLASH CAN"

    KAK INDUSTRY EXTENDED M13.5X1.0 LH "FLASH CAN".


    THE BORE WILL ALLOW A 9MM TO PASS THROUGH

     

    THIS IS A SOLID 6061 ALUMINUM DEVICE THAT IS DESIGNED TO DIRECT MUZZLE GASES AND THE MUZZLE FLASH FORWARD.

    THREADED M13.5X1.0 LH FOR SIG MPX 9MM OR SIMILAR WEAPONS. BLACK MILITARY TYPE HARD ANODIZING.

    THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE.

    THIS DEVICE IS DESIGNED TO DIRECT GASSES AND NOISE FORWARD AWAY FROM THE SHOOTER AND ENHANCE THE WEAPONS APPEARANCE..

    1.360 DIA

    5.00 LONG

    6061 ALUMINUM

    BLACK HARD ANODIZED FINISH

    7.78   OZ.

    3/4 WRENCH FLATS

    Learn More
  53. KAK INDUSTRY EXTENDED 1/2-36 "FLASH CAN" KAK INDUSTRY EXTENDED 1/2-36 "FLASH CAN"

    KAK INDUSTRY EXTENDED 1/2-36 "FLASH CAN"

    KAK INDUSTRY EXTENDED 1/2-36 "FLASH CAN".


    THE BORE WILL ALLOW A 9MM TO PASS THROUGH

     

    THIS IS A SOLID 6061 ALUMINUM DEVICE THAT IS DESIGNED TO DIRECT MUZZLE GASES AND THE MUZZLE FLASH FORWARD.

    THREADED 1/2-36 FOR 9MM OR SIMILAR WEAPONS. BLACK MILITARY TYPE HARD ANODIZING.

    THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE.

    THIS DEVICE IS DESIGNED TO DIRECT GASSES AND NOISE FORWARD AWAY FROM THE SHOOTER AND ENHANCE THE WEAPONS APPEARANCE..

    1.360 DIA

    5.00 LONG

    6061 ALUMINUM

    BLACK HARD ANODIZED FINISH

    7.83    OZ.

    3/4 WRENCH FLATS

    Learn More
  54. KAK INDUSTRY EXTENDED 5/8-24 "FLASH CAN" KAK INDUSTRY EXTENDED 5/8-24 "FLASH CAN"

    KAK INDUSTRY EXTENDED 5/8-24 "FLASH CAN"

    KAK INDUSTRY EXTENDED 5/8-24 "FLASH CAN".


    THE BORE WILL ALLOW A 45 CAL TO PASS THROUGH

     

    THIS IS A SOLID 6061 ALUMINUM DEVICE THAT IS DESIGNED TO DIRECT MUZZLE GASES AND THE MUZZLE FLASH FORWARD.

    THREADED 5/8-24 FOR BLK , 308 OR SIMILAR WEAPONS. BLACK MILITARY TYPE HARD ANODIZING.

    THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE.

    THIS DEVICE IS DESIGNED TO DIRECT GASSES AND NOISE FORWARD AWAY FROM THE SHOOTER AND ENHANCE THE WEAPONS APPEARANCE..

    1.360 DIA

    5.00 LONG

    6061 ALUMINUM

    BLACK HARD ANODIZED FINISH

    7.34    OZ.

    3/4 WRENCH FLATS

     

    Learn More
  55. KAK INDUSTRY MICRO M13.5X1.0LH "SLIMLINE FLASH CAN" KAK INDUSTRY MICRO M13.5X1.0LH "SLIMLINE FLASH CAN"

    KAK INDUSTRY MICRO M13.5X1.0LH "SLIMLINE FLASH CAN"

    KAK INDUSTRY "MICRO SLIMLINE FLASH CAN"

    SIMILAR TO THE STANDARD "FLASH CAN" BUT SHORTER AND SMALLER DIAMETER TO FIT INSIDE SLIM RAIL SYSTEMS

    YOU GUYS ASKED FOR IT SO HERE IT IS

    THIS IS A SOLID 6061 ALUMINUM DEVICE THAT IS DESIGNED TO DIRECT MUZZLE GASES AND THE MUZZLE FLASH FORWARD

    THREADED M13.5X1.0LH FOR 9MM OR SIMILAR WEAPONS

    BLACK MILITARY TYPE HARD ANODIZING

    THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE

    THIS DEVICE IS DESIGNED TO DIRECT GASSES AND NOISE FORWARD AWAY FROM THE SHOOTER AND ENHANCE THE WEAPONS APPEARANCE

    A CRUSH WASHER CAN BE USED IS SPECIFIC TIMING IS DESIRED

    THIS DEVICE CAN WITHSTAND FULL AUTO HARD USE, NO BACK PRESSURE IS CREATED SO GAS CUTTING IS NOT A PROBLEM

    MANY END USERS HAVE REPORTED THOUSANDS OF ROUNDS DOWNRANGE WITH NO CHANGE OR EROSION

    1.200 DIA

    1.750 LONG

    6061 ALUMINUM

    BLACK HARD ANODIZED FINISH

     1.67   OZ.

    3/4 WRENCH FLATS

    THIS MUZZLE DEVICE WILL FIT INSIDE UTG PRO, AERO COP AND OTHER RAILS THAT WILL NOT CLEAR THE ORIGINAL LARGER VERSION

    Learn More
  56. A2 BIRDCAGE  5/8-24 A2 BIRDCAGE  5/8-24

    A2 BIRDCAGE 5/8-24

    A2 BIRDCAGE 5/8-24 FOR 308 OR 300 BLK OR SIMILAR
    CRUSH WASHER NOT INCLUDED Learn More
    $12.00
  57. KAK INDUSTRY EXTENDED 1/2-28 "FLASH CAN" KAK INDUSTRY EXTENDED 1/2-28 "FLASH CAN"

    KAK INDUSTRY EXTENDED 1/2-28 "FLASH CAN"

    KAK INDUSTRY EXTENDED 1/2-28 "FLASH CAN".


    THE BORE WILL ALLOW A 9MM TO PASS THROUGH

     

    THIS IS A SOLID 6061 ALUMINUM DEVICE THAT IS DESIGNED TO DIRECT MUZZLE GASES AND THE MUZZLE FLASH FORWARD.

    THREADED 1/2-28 FOR 5.56 OR SIMILAR WEAPONS. BLACK MILITARY TYPE HARD ANODIZING.

    THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE.

    THIS DEVICE IS DESIGNED TO DIRECT GASSES AND NOISE FORWARD AWAY FROM THE SHOOTER AND ENHANCE THE WEAPONS APPEARANCE..

    1.360 DIA

    5.00 LONG

    6061 ALUMINUM

    BLACK HARD ANODIZED FINISH

    7.75   OZ.

    3/4 WRENCH FLATS


    Learn More
  58. KAK INDUSTRY MICRO 5/8-24 "SLIMLINE FLASH CAN" KAK INDUSTRY MICRO 5/8-24 "SLIMLINE FLASH CAN"

    KAK INDUSTRY MICRO 5/8-24 "SLIMLINE FLASH CAN"

    KAK INDUSTRY MICRO "SLIMLINE FLASH CAN"

    SIMILAR TO THE STANDARD "FLASH CAN" BUT SHORTER AND SMALLER DIAMETER TO FIT INSIDE SLIM RAIL SYSTEMS

    YOU GUYS ASKED FOR IT SO HERE IT IS

    THIS IS A SOLID 6061 ALUMINUM DEVICE THAT IS DESIGNED TO DIRECT MUZZLE GASES AND THE MUZZLE FLASH FORWARD

    THREADED 5/8-24 FOR 30 CALIBER OR SIMILAR WEAPONS

    BLACK MILITARY TYPE HARD ANODIZING

    THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE

    THIS DEVICE IS DESIGNED TO DIRECT GASSES AND NOISE FORWARD AWAY FROM THE SHOOTER AND ENHANCE THE WEAPONS APPEARANCE

    THIS DEVICE CAN WITHSTAND FULL AUTO HARD USE, NO BACK PRESSURE IS CREATED SO GAS CUTTING IS NOT A PROBLEM

    MANY END USERS HAVE REPORTED THOUSANDS OF ROUNDS DOWNRANGE WITH NO CHANGE OR EROSION

    1.200 DIA

    1.750 LONG

    6061 ALUMINUM

    BLACK HARD ANODIZED FINISH

    1.53   OZ.

    3/4 WRENCH FLATS

    THIS MUZZLE DEVICE WILL FIT INSIDE UTG PRO, AERO COP AND OTHER RAILS THAT WILL NOT CLEAR THE ORIGINAL LARGER VERSION

    Learn More
  59. KAK INDUSTRY 1/2-28 "FLASH CAN" KAK INDUSTRY 1/2-28 "FLASH CAN"

    KAK INDUSTRY 1/2-28 "FLASH CAN"

    KAK INDUSTRY "FLASH CAN".


    THE BORE WILL ALLOW A 9MM TO PASS THROUGH

     4.25 oz

    THIS IS A SOLID 6061 ALUMINUM DEVICE THAT IS DESIGNED TO DIRECT MUZZLE GASES AND THE MUZZLE FLASH FORWARD. THREADED 1/2-28 FOR 5.56 OR SIMILAR WEAPONS. BLACK MILITARY TYPE HARD ANODIZING. THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE. THIS DEVICE IS DESIGNED TO DIRECT GASSES AND NOISE FORWARD AWAY FROM THE SHOOTER AND ENHANCE THE WEAPONS APPEARANCE.. 1.360 DIA 3.250 LONG 6061 ALUMINUM BLACK HARD ANODIZED FINISH 4.2 OZ. 3/4 WRENCH FLATS

    Learn More

59 Item(s)

Grid  List 

Set Descending Direction