Cart:

0 item(s) - $0.00
You have no items in your shopping cart.

SHIPPING TIMES ARE 1-2 DAYS TO PROCESS

805-981-4734 M-F 9-3 PST   CS@KAKINDUSTRY.COM

More Views

KAK REM 700 18 INCH 308 WIN KAK HEAVY PROFILE

Quick Overview

KAK INDUSTRY 308 WIN BARREL FOR REMINGTON 700


USES THE SAVAGE "STYLE" BARREL NUT SYSTEM


INCLUDES BARREL AND LOCK NUT


 57.6 OZ


18.0 INCH KAK HEAVY CONTOUR (INTENDED FOR CHASSIS GUNS)


308 WIN CHAMBER


1:10 TWIST


416 STAINLESS


MUZZLE THREADED 5/8-24


MATTE BLASTED BLACK FINISH


GRADUATED MARKS ON THE BARREL SHANK ALLOW FOR PRECISE HEADSPACE ADJUSTMENTS IN .0017 INCREMENTS


KAK INDUSTRY PROUDLY USES GREEN MOUNTAIN RIFLE BARREL BLANKS


SOME INLETTING MAY BE REQUIRED AROUND THE BARREL NUT AND CONTOUR DEPENDING ON YOUR STOCK


 


PLEASE CONSULT A QUALIFIED GUNSMITH WHEN INSTALLING


 


THESE BARRELS ARE FOR REMINGTON BOLT ACTIONS (MDL700, MDL7, ETC) HOWEVER THEY USE A SAVAGE "STYLE" BARREL NUT SYSTEM FOR EASE OF INSTALLATION.  


THE BARREL AND LOCK NUT ARE INCLUDED IN THE PACKAGE


 


INSTALL INSTRUCTIONS


MAKE SURE ALL MATING SURFACES ARE CLEAN ON ACTION FACE, RECOIL LUG, AND LOCK NUT


LIGHTLY GREASE ALL MATING SURFACES


REMOVE EJECTOR FROM BOLT FACE


INSTALL BOLT INTO ACTION


INSTALL GO GAUGE OR KNOWN GOOD CARTRIDGE IN BOLT FACE


REMOVE THE LOCK NUT FROM THE BARREL AND APPLY A SMALL DROP OF BLUE NON PERMANENT LOC-TITE TO THREADS


HAND TIGHTEN LOCK NUT ONTO BARREL TILL IT STOPS AND SLIDE RECOIL LUG ONTO BARREL


TIGHTEN BARREL INTO ACTION GUIDING THE HEADSPACE GAUGE INTO THE CHAMBER


WHEN THE BARREL IS SCREWED IN TILL THE POINT THAT IT IS HITTING ON THE GAGE - THIS IS MINIMUM HEADSPACE


THE GRADUATED MARKS ON THE BARREL SHANK REPRESENT .0017 OF HEADSPACE ADJUSTMENT PER LINE


BACK THE BARREL OFF APPROX ONE GRADUATED LINE TO GIVE PROPER CLEARANCE FOR HEADSPACE


MORE OR LESS HEADSPACE ADJUSTMENT MAY BE REQUIRED DEPENDING ON YOUR APPLICATION


TIGHTEN DOWN LOCK NUT WITH A FACTORY SAVAGE BARREL NUT WRENCH MAKING SURE THAT RECOIL LUG IS ALIGNED PROPERLY WITH AN ALIGNMENT TOOL OR SIMILAR


THE NUT SHOULD BE TORQUED TO A MINIMUM OF 50 FOOT POUNDS


TEST THE FIT OF BOTH GO AND NO-GAGES IN THE CHAMBER TO ASSURE PROPER HEADSPACE HAS BEEN SET

Manufacturer: KAK INDUSTRY

Availability: In stock

$200.00
OR

Details

KAK INDUSTRY 308 WIN BARREL FOR REMINGTON 700

USES THE SAVAGE "STYLE" BARREL NUT SYSTEM

INCLUDES BARREL AND LOCK NUT

 57.6 OZ

18.0 INCH KAK HEAVY CONTOUR (INTENDED FOR CHASSIS GUNS)

308 WIN CHAMBER

1:10 TWIST

416 STAINLESS

MUZZLE THREADED 5/8-24

MATTE BLASTED BLACK FINISH

GRADUATED MARKS ON THE BARREL SHANK ALLOW FOR PRECISE HEADSPACE ADJUSTMENTS IN .0017 INCREMENTS

KAK INDUSTRY PROUDLY USES GREEN MOUNTAIN RIFLE BARREL BLANKS

SOME INLETTING MAY BE REQUIRED AROUND THE BARREL NUT AND CONTOUR DEPENDING ON YOUR STOCK

 

PLEASE CONSULT A QUALIFIED GUNSMITH WHEN INSTALLING

 

THESE BARRELS ARE FOR REMINGTON BOLT ACTIONS (MDL700, MDL7, ETC) HOWEVER THEY USE A SAVAGE "STYLE" BARREL NUT SYSTEM FOR EASE OF INSTALLATION.  

THE BARREL AND LOCK NUT ARE INCLUDED IN THE PACKAGE

 

INSTALL INSTRUCTIONS

MAKE SURE ALL MATING SURFACES ARE CLEAN ON ACTION FACE, RECOIL LUG, AND LOCK NUT

LIGHTLY GREASE ALL MATING SURFACES

REMOVE EJECTOR FROM BOLT FACE

INSTALL BOLT INTO ACTION

INSTALL GO GAUGE OR KNOWN GOOD CARTRIDGE IN BOLT FACE

REMOVE THE LOCK NUT FROM THE BARREL AND APPLY A SMALL DROP OF BLUE NON PERMANENT LOC-TITE TO THREADS

HAND TIGHTEN LOCK NUT ONTO BARREL TILL IT STOPS AND SLIDE RECOIL LUG ONTO BARREL

TIGHTEN BARREL INTO ACTION GUIDING THE HEADSPACE GAUGE INTO THE CHAMBER

WHEN THE BARREL IS SCREWED IN TILL THE POINT THAT IT IS HITTING ON THE GAGE - THIS IS MINIMUM HEADSPACE

THE GRADUATED MARKS ON THE BARREL SHANK REPRESENT .0017 OF HEADSPACE ADJUSTMENT PER LINE

BACK THE BARREL OFF APPROX ONE GRADUATED LINE TO GIVE PROPER CLEARANCE FOR HEADSPACE

MORE OR LESS HEADSPACE ADJUSTMENT MAY BE REQUIRED DEPENDING ON YOUR APPLICATION

TIGHTEN DOWN LOCK NUT WITH A FACTORY SAVAGE BARREL NUT WRENCH MAKING SURE THAT RECOIL LUG IS ALIGNED PROPERLY WITH AN ALIGNMENT TOOL OR SIMILAR

THE NUT SHOULD BE TORQUED TO A MINIMUM OF 50 FOOT POUNDS

TEST THE FIT OF BOTH GO AND NO-GAGES IN THE CHAMBER TO ASSURE PROPER HEADSPACE HAS BEEN SET