MPX

HARDENED STEEL

WITH STAKING CUTS

Learn More

KAK SHOCKWAVE PACKAGE - BLUE

INCLUDES

SHOCKWAVE BLADE PISTOL STABILIZER - BLUE

KAK SHOCKWAVE TUBE

CASTLE NUT

MIL-SPEC ENDPLATE

CARBINE BUFFER SPRING

STANDARD CARBINE BUFFER

EVERYTHING YOU NEED TO INSTALL THE SHOCKWAVE SYSTEM.

ADDITIONAL SHIPPING WILL APPLY TO BULK ORDERS.

Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits the KAK shockwave tube. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation.

This veteran-designed and U.S.A.-manufactured shooting aid improves your marksmanship by providing additional support of your pistol while you still hold and operate it with one hand. The Blade incorporates a vertical “fin,” which you stabilize against the inside of your forearm when in the firing position. Or, you can stabilize the Blade against your cheek for a perfect, steady sight picture.

Features:
– Fits kak shockwave tube
– Available in Black, FDE, Grey, OD Green, Plum, Brown, White, Red, and Blue
– Quick and easy to install
– Provides additional support during firing
– Weighs a scant 5.0 ounces
– ATF approved for pistol use
– Veteran designed, engineered, marketed, and sold
– Made in U.S.A.

ADDITIONAL SHIPPING WILL APPLY TO BULK ORDERS

Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits the KAK shockwave tube. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation.

This veteran-designed and U.S.A.-manufactured shooting aid improves your marksmanship by providing additional support of your pistol while you still hold and operate it with one hand. The Blade incorporates a vertical “fin,” which you stabilize against the inside of your forearm when in the firing position. Or, you can stabilize the Blade against your cheek for a perfect, steady sight picture.

Features:
– Fits kak shockwave tube
– Available in Black, FDE, Grey, OD Green, Plum, Brown, White, Red, and Blue
– Quick and easy to install
– Provides additional support during firing
– Weighs a scant 5.0 ounces
– ATF approved for pistol use
– Veteran designed, engineered, marketed, and sold
– Made in U.S.A.

ADDITIONAL SHIPPING WILL APPLY TO BULK ORDERS

Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits the KAK shockwave tube. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation.

This veteran-designed and U.S.A.-manufactured shooting aid improves your marksmanship by providing additional support of your pistol while you still hold and operate it with one hand. The Blade incorporates a vertical “fin,” which you stabilize against the inside of your forearm when in the firing position. Or, you can stabilize the Blade against your cheek for a perfect, steady sight picture.

Features:
– Fits kak shockwave tube
– Available in Black, FDE, Grey, OD Green, Plum, Brown, White, Red, and Blue
– Quick and easy to install
– Provides additional support during firing
– Weighs a scant 5.0 ounces
– ATF approved for pistol use
– Veteran designed, engineered, marketed, and sold
– Made in U.S.A.

ADDITIONAL SHIPPING WILL APPLY TO BULK ORDERS

Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits the KAK shockwave tube. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation.

This veteran-designed and U.S.A.-manufactured shooting aid improves your marksmanship by providing additional support of your pistol while you still hold and operate it with one hand. The Blade incorporates a vertical “fin,” which you stabilize against the inside of your forearm when in the firing position. Or, you can stabilize the Blade against your cheek for a perfect, steady sight picture.

Features:
– Fits kak shockwave tube
– Available in Black, FDE, Grey, OD Green, Plum, Brown, White, Red, and Blue
– Quick and easy to install
– Provides additional support during firing
– Weighs a scant 5.0 ounces
– ATF approved for pistol use
– Veteran designed, engineered, marketed, and sold
– Made in U.S.A.

ADDITIONAL SHIPPING WILL APPLY TO BULK ORDERS

Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits the KAK shockwave tube. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation.

This veteran-designed and U.S.A.-manufactured shooting aid improves your marksmanship by providing additional support of your pistol while you still hold and operate it with one hand. The Blade incorporates a vertical “fin,” which you stabilize against the inside of your forearm when in the firing position. Or, you can stabilize the Blade against your cheek for a perfect, steady sight picture.

Features:
– Fits kak shockwave tube
– Available in Black, FDE, Grey, OD Green, Plum, Brown, White, Red, and Blue
– Quick and easy to install
– Provides additional support during firing
– Weighs a scant 5.0 ounces
– ATF approved for pistol use
– Veteran designed, engineered, marketed, and sold
– Made in U.S.A.

ADDITIONAL SHIPPING WILL APPLY TO BULK ORDERS

KAK SHOCKWAVE SET SCREW REPLACMENT

THIS SCREW IS USED TO FIX THE BLADE TO THE TUBE

THESE ARE SOLD AS SPARES OR EXTRAS FOR WHAT IS NORMALLY PROVIDED IN THE BLADE PACKAGE

KAK HALF DOG SET SCREW PACK OF 2

THESE ARE USED FOR OUR CZ, MPX, AND MP5K BUFFER TUBE ADAPTORS TO INDEX THE BUFFER TUBE

THESE ARE SOLD AS SPARES OR EXTRAS FOR WHAT IS NORMALLY PROVIDED IN THE ADAPTOR KITS

KAK SIG MPX / MCX SHOCKWAVE KIT

INCLUDES

KAK MPX / MCX BUFFER TUBE ADAPTOR

KAK SHOCKWAVE TUBE

CASTLE NUT

SHOCKWAVE BLADE BLACK

ALL MOUNTING HARDWARE

FITS GEN1 MODELS

SOME GEN 2 MODELS MAY NOT FIT DUE TO RAIL VARIATIONS FROM SIG FACTORY

KAK SIG MPX / MCX BUFFER TUBE ADAPTOR

FITS GEN1 MODELS

SOME GEN 2 MODELS MAY NOT FIT DUE TO RAIL VARIATIONS FROM SIG FACTORY

ENABLES THE ADDITION OF AN AFTERMARKET ARM BRACE OR
OTHER PISTOL BUFFER TUBE ACCESSORY

ADAPTER IS MADE OF 6061 T6 ALUMINUM, FLAT BLACK ANODIZED

IF USING A CARBINE STYLE CASTLE NUT BUFFER TUBE 
THERE ARE TWO THREADED ALIGNMENT HOLES (10x32 THREAD) FOR TUBES
THAT USE A NOTCH FOR INDEXING. A 3/16 HALF DOG SOCKET SET SCREW
WOULD BE USED FOR PROPER INDEXING.

Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits the KAK shockwave tube. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation.

This veteran-designed and U.S.A.-manufactured shooting aid improves your marksmanship by providing additional support of your pistol while you still hold and operate it with one hand. The Blade incorporates a vertical “fin,” which you stabilize against the inside of your forearm when in the firing position. Or, you can stabilize the Blade against your cheek for a perfect, steady sight picture.

Features:
– Fits kak shockwave tube
– Available in Black, FDE, Grey, OD Green, Plum, Brown, White, Red, and Blue
– Quick and easy to install
– Provides additional support during firing
– Weighs a scant 5.0 ounces
– ATF approved for pistol use
– Veteran designed, engineered, marketed, and sold
– Made in U.S.A.

ADDITIONAL SHIPPING WILL APPLY TO BULK ORDERS

Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits the KAK shockwave tube. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation.

This veteran-designed and U.S.A.-manufactured shooting aid improves your marksmanship by providing additional support of your pistol while you still hold and operate it with one hand. The Blade incorporates a vertical “fin,” which you stabilize against the inside of your forearm when in the firing position. Or, you can stabilize the Blade against your cheek for a perfect, steady sight picture.

Features:
– Fits kak shockwave tube
– Available in Black, FDE, Grey, OD Green, Plum, Brown, White, Red, and Blue
– Quick and easy to install
– Provides additional support during firing
– Weighs a scant 5.0 ounces
– ATF approved for pistol use
– Veteran designed, engineered, marketed, and sold
– Made in U.S.A.

ADDITIONAL SHIPPING WILL APPLY TO BULK ORDERS

KAK SHOCKWAVE TUBE 

Features -

12 length adjustment settings.

Anti-rotation and anti-thrust design stays put without sliding forward or spinning.

Tube is flush with rear of SHOCKWAVE BLADE when fully collapsed.

When fully adjusted out the assembly is very rigid..

Strong CASTLE NUT design accepts all mil spec endplates and any aftermarket endplate.

Accepts all carbine buffer systems..

4.546 OZ

7.25 TOTAL OVERALL LENGTH

OD 1.25 

SHOCKWAVE BLADE NOT INCLUDED

PICTURES WITH BLADE SHOW ADJUSTMENT RANGE ONLY

ADDITIONAL SHIPPING WILL APPLY TO BULK ORDERS

Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits the KAK shockwave tube. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation.

This veteran-designed and U.S.A.-manufactured shooting aid improves your marksmanship by providing additional support of your pistol while you still hold and operate it with one hand. The Blade incorporates a vertical “fin,” which you stabilize against the inside of your forearm when in the firing position. Or, you can stabilize the Blade against your cheek for a perfect, steady sight picture.

Features:
– Fits kak shockwave tube
– Available in Black, FDE, Grey, OD Green, Plum, Brown, White, Red, and Blue
– Quick and easy to install
– Provides additional support during firing
– Weighs a scant 5.0 ounces
– ATF approved for pistol use
– Veteran designed, engineered, marketed, and sold
– Made in U.S.A.

ADDITIONAL SHIPPING WILL APPLY TO BULK ORDERS

Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits the KAK shockwave tube. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation.

This veteran-designed and U.S.A.-manufactured shooting aid improves your marksmanship by providing additional support of your pistol while you still hold and operate it with one hand. The Blade incorporates a vertical “fin,” which you stabilize against the inside of your forearm when in the firing position. Or, you can stabilize the Blade against your cheek for a perfect, steady sight picture.

Features:
– Fits kak shockwave tube
– Available in Black, FDE, Grey, OD Green, Plum, Brown, White, Red, and Blue
– Quick and easy to install
– Provides additional support during firing
– Weighs a scant 5.0 ounces
– ATF approved for pistol use
– Veteran designed, engineered, marketed, and sold
– Made in U.S.A.

ADDITIONAL SHIPPING WILL APPLY TO BULK ORDERS