Rating:
93% of 100
SKU
KAK-REM-700-16-INCH-350-LEGEND-HEAVY-PROFILE

KAK INDUSTRY 350 LEGEND  BARREL FOR REMINGTON 700

USES THE SAVAGE "STYLE" BARREL NUT SYSTEM

INCLUDES BARREL AND LOCK NUT

 

16.0 INCH HEAVY CONTOUR

350 LEGEND CHAMBER

416R STAINLESS STEEL

MUZZLE THREADED 5/8-24

GREY BLASTED FINISH 

GRADUATED MARKS ON THE BARREL SHANK ALLOW FOR PRECISE HEADSPACE ADJUSTMENTS IN .0017 INCREMENTS

KAK INDUSTRY PROUDLY USES GREEN MOUNTAIN RIFLE BARREL BLANKS

SOME INLETTING MAY BE REQUIRED AROUND THE BARREL NUT AND CONTOUR DEPENDING ON YOUR STOCK

 

PLEASE CONSULT A QUALIFIED GUNSMITH WHEN INSTALLING

 

THESE BARRELS ARE FOR REMINGTON BOLT ACTIONS (MDL700, MDL7, ETC) HOWEVER THEY USE A SAVAGE "STYLE" BARREL NUT SYSTEM FOR EASE OF INSTALLATION.  

THE BARREL AND LOCK NUT ARE INCLUDED IN THE PACKAGE

 

INSTALL INSTRUCTIONS

MAKE SURE ALL MATING SURFACES ARE CLEAN ON ACTION FACE, RECOIL LUG, AND LOCK NUT

LIGHTLY GREASE ALL MATING SURFACES

REMOVE EJECTOR FROM BOLT FACE

INSTALL BOLT INTO ACTION

INSTALL GO GAUGE OR KNOWN GOOD CARTRIDGE IN BOLT FACE

REMOVE THE LOCK NUT FROM THE BARREL AND APPLY A SMALL DROP OF BLUE NON PERMANENT LOC-TITE TO THREADS

HAND TIGHTEN LOCK NUT ONTO BARREL TILL IT STOPS AND SLIDE RECOIL LUG ONTO BARREL

TIGHTEN BARREL INTO ACTION GUIDING THE HEADSPACE GAUGE INTO THE CHAMBER

WHEN THE BARREL IS SCREWED IN TILL THE POINT THAT IT IS HITTING ON THE GAGE - THIS IS MINIMUM HEADSPACE

THE GRADUATED MARKS ON THE BARREL SHANK REPRESENT .0017 OF HEADSPACE ADJUSTMENT PER LINE

BACK THE BARREL OFF APPROX ONE GRADUATED LINE TO GIVE PROPER CLEARANCE FOR HEADSPACE

MORE OR LESS HEADSPACE ADJUSTMENT MAY BE REQUIRED DEPENDING ON YOUR APPLICATION

TIGHTEN DOWN LOCK NUT WITH A FACTORY SAVAGE BARREL NUT WRENCH MAKING SURE THAT RECOIL LUG IS ALIGNED PROPERLY WITH AN ALIGNMENT TOOL OR SIMILAR

THE NUT SHOULD BE TORQUED TO A MINIMUM OF 50 FOOT POUNDS

TEST THE FIT OF BOTH GO AND NO-GAGES IN THE CHAMBER TO ASSURE PROPER HEADSPACE HAS BEEN SET

KAK INDUSTRY
$200.00
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Customer Reviews

3 Item(s)

Show per page
  1. Accurate barrel
    Quality
    80%
    Price
    80%
    Value
    80%
    The original barrel I received had some tooling marks on it. I contacted support and they promptly swapped it out. Good communication and good service. Small issue with quality control. Second barrel received was in perfect condition. Also received a recoil lug that I had to file out a imperfection otherwise I would have given them 5 stars for service. For me this barrel heavily prefers heavier projectiles with this twist rate. 170g and 180g shot sub MOA, approx .5-.6inch. The 150g projectiles grouped very poorly for me (2-3inch groups). I prefer the others regardless. Very consistent and repeatable. Should be a great deer gun. Would certainly consider purchasing from them again.

    Review by

    Posted on

  2. Tack driver
    Value
    100%
    Quality
    100%
    Price
    100%
    This is an extremely accurate and well built barrel at a great price. I couldn’t be happier with my purchase. Customer service is very quick to respond with questions and shipping was fast.

    Review by

    Posted on

  3. Lightening FAST delivery!
    Quality
    100%
    Price
    100%
    Value
    100%
    KAK Industry has done it again! Lightening FAST Delivery of a GREAT 350 Legend barrel for my Remington 700 build. It took longer to remove the old barrel than it did for this one to arrive at my door! Once installed, which was extremely easy to do, it shoots fantastic. KAK always makes outstanding products, thanks again!

    Review by

    Posted on

3 Item(s)

Show per page