AR10 LR-MAGNUM BCG- Dual Ejector Bolt

AR10 LR-MAGNUM BCG- Dual Ejector Bolt

SKU:
MO-427-0503-002
$255.00
(8 reviews)
Current Stock:
Adding to cart… The item has been added
Description

KAK INDUSTRY AR10/LR-MAGNUM COMPLETE BOLT CARRIER GROUP

 THIS IS NOT FOR .308

  • Full Auto Profile with correct sear trip placement
  • Permatex added between Gas Key and Carrier Mating Surface
  • Carrier- 8620 steel, outside rails, bolt runs, and gas bores ground to .0002 tolerances
  • Gas key – 4130 steel, heat treated, secured with proper grade 8 fasteners, torqued to spec, staked with  hydraulic staking machine 
  • MPI Tested and marked
  • 9310 Dual ejector bolt, phosphate finish 
  • High pressure firing pin and smaller HP FP hole
  • 18 oz

CORRECT AUTO SEAR TRIP LOCATION

.535 BOLT FACE FOR WINCHESTER SHORT MAG, 450 MARLIN OR SIMILAR

INCLUDES O-RING EXTRACTOR HELPER TO RUN UNDER ALL CONDITIONS

WILL WORK WITH DPMS FORWARD ASSIST OR REAR AERO STYLE FORWARD ASSIST

Additional Information
Platform:
AR10
Finish:
Nitride
Hand:
Right Hand
Caliber:
Winchester short mag
Vent Type:
No Preference

Reviews

  • 5
    Ar-10 6.5 arc bcg

    Posted by Fred Ivey on January 15, 2025

    Bcg was well packed and a piece of art work machine work was wondering it looked really nice no doubt that it will perform the same

  • 5
    KAK magnum bolt carrier group

    Posted by Ray on August 16, 2024

    I used this bolt carrier group to build a 338 RCM. Works great, in 18" AR 10, chambered in 338 RCM, 1/2" accuracy with a variety of hunting style bullets. Brass is made from 6.5 PRC cases.

  • 5
    Ar10 Magnum BCG

    Posted by Lowell Kreider on May 27, 2024

    Works flawless, great design

  • 5
    This is a well made BCG

    Posted by George Williamson on January 1, 2024

    I am building a 300 WSM gas gun. I haven't received the barrel yet. But this BCG is built for this and has double ejectors. It goes with the modified upper I purchased. It appears to be very well made and I am very sure it will work. The bolt face measures as advertised. I can't wait until I put this together. Hopefully I can update this review when I do.

  • 5
    KAK Magnum Bolt Carrier

    Posted by Aaron Parker on August 30, 2023

    I bought this for an unfinished build. I haven't had a chance to use it yet, but it is definitely well built. This is for a 6.5 PRC, but I'm thinking about building a .300 WSM too and will need another Magnum bolt for that. I'll definitely be getting it from KAK Industries, along with a few other parts.

  • 5
    12 weeks and counting down for the build

    Posted by Top 'O Texas on April 13, 2023

    Everything appears good so far as I haven't used it yet. I'm awaiting my 6.5prc barrel along with other components to complete it.

  • 5
    Building 6.5 Saum

    Posted by MICHAEL on January 14, 2021

    Excellent quality,

  • 5
    Works well on 300 wsm

    Posted by Franz on December 26, 2017

    I built a 300 wsm ar10 and modified a standard bolt but was having feeding issues. Realized I needed to remove even more material from the extractor and that the extractor groove in the bolt would leave a larger gap then I felt comfortable with. Was looking to see if anyone had worked there way around this problem when I found these bcg's. This bcg solved all the problems and worked immediately! The bolt is made specifically for the magnumbolt face and the extractor and extractor groove are sized appropriately.